try putting a heavy duty flasher in see if that helps
whats up, here's my prob I installed my side makers with no problem all the lights worked fine, after a couple weeks I notice when I went to hit the lever for the right side it blinked fast which usually means the some light is out. I checked all the lights they are all lit but the right front side is dim, so I put in some nice hyper white lights still that side was dim allitle brighter and blinked fast, whats do you think is going on?
try putting a heavy duty flasher in see if that helps
STEPHEN
2000 GMC K2500 4x4
2004 Chevrolet Tahoe 4x4
1) Take out the bulb.
2) Get a screwdriver.
3) Look inside the housing to find the 2 metal parts where the bulb's filaments are supposed to touch.
4) Use the screwdriver to bend the metal upwards.
--Basically, you want to make sure you bend the metal things enough to where they will get a SOLID connection to the bulb's filaments.
5) Put in bulb.
Voila`. Fixed!
Nothing is grounding out is it? Sound like others have said either the contacts are not touching or may be grounded out....recheck your wiring again.
thanks, i looked at the wiring it was the neg.
Bookmarks