The Galant Center - Powered by vBulletin

Thread: LED Dome Lights

Showing results 1 to 9 of 9
  1. #1
    New Member PearlG's Avatar
    Join Date
    07-08-2009
    Location
    Canton, Georgia
    Posts
    89

    Icon10 LED Dome Lights

    tunerdomes.com
    hey guys found a site that does colored LED dome lights, i just got mine but they had the wrong sizes up on the site so they fixed it but they are sending me the correct size bulbs for free.
    there really cheap too,
    if your get some in 8G's your domes are 44mm so dont buy the 31mm that it says is for galants. but the 31mm do fit the sun visor mirror lights
    100% good site
    Last edited by PearlG; 10-16-2009 at 09:59 PM

  2. #2
    The question is how long will they last...

  3. #3
    You are here entirely tooo much!! Jeffylou87's Avatar
    Join Date
    01-19-2007
    Location
    Lyndhurst, NJ
    Posts
    3,473
    My dome lights..


    This is just them at night, no flash..

  4. #4
    You are here entirely tooo much!!
    Join Date
    05-02-2008
    Location
    Hacienda Heights, CA
    Posts
    3,014
    thanks for the info

    Quote Originally Posted by IVORY_G View Post
    never pull out, always squeeze inside! LOL!

  5. #5
    Experienced TGC Member johnygezony's Avatar
    Join Date
    10-05-2008
    Location
    Grand Rapids Michigan
    Posts
    1,141
    jeff did you make those ?

  6. #6
    You are here entirely tooo much!! Jeffylou87's Avatar
    Join Date
    01-19-2007
    Location
    Lyndhurst, NJ
    Posts
    3,473
    Bought the led boards already made.. Soldered them into the dome light and the circuit board just managed to fit perfectly.. I'll see if I can find them again and post up a link..

  7. #7
    You are here entirely tooo much!! Jeffylou87's Avatar
    Join Date
    01-19-2007
    Location
    Lyndhurst, NJ
    Posts
    3,473
    http://cgi.ebay.com/1156-Car-Circuit...ht_3137wt_1015

    Not the same person but same concept.. I just cut the wires for the connector that it came with and soldered it to the two ends where the bulb would usually hook on..

  8. #8
    New Member PearlG's Avatar
    Join Date
    07-08-2009
    Location
    Canton, Georgia
    Posts
    89
    they last a long time there professional quality but im talking to the owner right now about getting ones that fit perfectly cause the ones that just resent me will have to be soldered in there

  9. #9
    i have so for sale

Posting Rules

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •