The Galant Center - Powered by vBulletin

Thread: 8G timing mark locations

Showing results 1 to 2 of 2
  1. #1

    8G timing mark locations

    I have been searching and searching but can't come across every timing mark for the I4.
    I have found the cam shaft and the balance shaft for sure.
    But i am still a little bit in question as to weather or not the crank shaft and the other lower pully i have on the correct marks.

    Dont want to hear any junk just want the locations to the correct marks. Pictures would be great if anyone has any.

  2. #2
    I found all four marks after alot of digging around on the internet. The cam shaft, oil pump, and balance pulley's are obviouse and easy to locate. The crank shaft is the one I had in question being that it is a notch in the crank shaft sensor plate and then on the block it is only a little dash for the mark. It can be a bit difficult to locate it if you dont know what you are looking for.

Posting Rules

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •