My 2.0l w/ stock cams, and 7.8:1 compression pulls 22inch/Hg
What's your vacuum at idle? And whats your idle RPM?
On my old motor, from the day i put the boost gauge on to the day it died, motor was always at -20vacuum at idle, ~900rpms. Now with the new motor, its -25, ~850rpms. Just wondering how varied everyone else's readings are
My 2.0l w/ stock cams, and 7.8:1 compression pulls 22inch/Hg
______________________________
1994 Galant GS-Turbo
A clogged PCV valve will increase your engine's vacuum reading.
______________________________
1994 Galant GS-Turbo
mine is -25 at 850 rpms
2014 Lancer Evo GSR
1996 Galant S 5 Speed Turbo
Need a Turbo rebuilt or upgraded--> http://www.thegalantcenter.org/showt...ebuild-Service
-15 at 670RPM....this is a 6A12TT though.
~20 at idle on a 4g63, but my rpm gauge is not working
-20 at idle @ 850rpms on a 140k stock 4G64
1991 Galant VR4 1948/2000_________1996 Galant "S" 5 speed 2.4L turbo
about ~21 at idle rpm 850
---||| 97Galant, E3 16G, Safc, 5spd,Drifter Body |||---
ok so after a 900 mile drive home and a tune up its now -18 or -20 at 800 rpm
2014 Lancer Evo GSR
1996 Galant S 5 Speed Turbo
Need a Turbo rebuilt or upgraded--> http://www.thegalantcenter.org/showt...ebuild-Service
Bookmarks