The Galant Center - Powered by vBulletin

Thread: Gauge Cluster Window

Showing results 1 to 6 of 6
  1. #1

    Gauge Cluster Window

    Since I bought my G the gauge cluster window has always been clouded as if some corrosive substance had been spilled on it at sometime. Does anyone know where I can find a replacement window?

  2. #2
    Member
    Join Date
    01-18-2003
    Location
    Brisbane, Australia
    Posts
    132
    sand it with about 1200 or 2000 grit wet sand paper.. then polish it?! someone else here might have a better suggestion..

  3. #3
    Senior TGC Member 03-Galant-ES's Avatar
    Join Date
    01-08-2008
    Location
    Levittown NY
    Posts
    2,786
    I would try to clean it and use a nice plastic polish if that doesnt work go to junkyard for like 10 bucks.

  4. #4
    I had the same problem and couldn't clean it other than temporarily with anything. The plastic is scratched and needs to be replaced. I got a new one for about $15 from the dealer and you can replace it with help from 03-Galant_ES's tutorial on replacing his guages -
    https://www.thegalantcenter.org/showthread.php?t=35976

  5. #5
    Experienced TGC Member 02redgalant's Avatar
    Join Date
    02-07-2007
    Location
    ORLANDO
    Posts
    1,599
    I had the same issue pull the cluster and remove the lense...give it a good polish it with plastic x it'll look good as new

  6. #6
    Thanks for the responses everyone.

    I think I'm going to try the Plastx first and if that doesn't work then just get a new lens. I'll post how it works out.

Posting Rules

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •