The Galant Center - Powered by vBulletin

Thread: Utah Galants - Professional Photo Shoot

Page 1 of 3 123 LastLast
Showing results 1 to 20 of 51
  1. #1
    Banned
    Join Date
    08-25-2005
    Location
    SLC, UT
    Posts
    762

    Utah Galants - Professional Photo Shoot

    I know maybe a few of these were posted before, but here we go. The silver 8G is boostzealot's 6G74-swapped, 230 WHP N/A beast. The orange one is mine. It's slow.





















    Photography courtesy of Orlando @ Orlandoech.com

  2. #2
    Senior TGC Member lonestar22's Avatar
    Join Date
    01-24-2005
    Location
    DFW/Stillwater
    Posts
    2,752
    pics are fucking sweet.

    woudnt black paint on an intercooler make it more victim to heatsoak?
    RIP GALANT, GOOD MORNING BMW 330i

    330i ZSP (E90) - S4 (B5) / hellaflush

  3. #3
    Banned
    Join Date
    08-25-2005
    Location
    SLC, UT
    Posts
    762
    Quote Originally Posted by lonestar22 View Post
    pics are fucking sweet.

    woudnt black paint on an intercooler make it more victim to heatsoak?
    Thanks.

    And no, it's just the opposite. It's been an ongoing debate but black actually radiates heat better to some degree, ignoring light absorption.

  4. #4
    whos faster? :)

  5. #5
    ^ interesting. All in all great shoot dude looks sexy as always

    ~Gabe

    When I feel like eating a banana, I like to go to the zoo, sucker punch a gorilla and try to run with a banana hanging out my bum. Then if I succeed, I enjoy my victory with said banana and a stroopwaffle.

  6. #6
    Banned
    Join Date
    08-25-2005
    Location
    SLC, UT
    Posts
    762
    Quote Originally Posted by qnz View Post
    whos faster? :)
    BJ's, right now, by 230 WHP. My Galant is out of commission for a while. Nothing wrong with it, but I'm taking some time to do a lot of things I've been putting off. Preventative maintenance, and other stuff.

  7. #7
    Senior TGC Member lonestar22's Avatar
    Join Date
    01-24-2005
    Location
    DFW/Stillwater
    Posts
    2,752
    i hate im going to have to get rid of my VRG bumper soon for a FMIC
    RIP GALANT, GOOD MORNING BMW 330i

    330i ZSP (E90) - S4 (B5) / hellaflush

  8. #8
    Banned
    Join Date
    08-25-2005
    Location
    SLC, UT
    Posts
    762
    Quote Originally Posted by lonestar22 View Post
    i hate im going to have to get rid of my VRG bumper soon for a FMIC
    Shouldn't have any problem fitting one, no? I can't obviously because I have piping that runs behind my IC. "Why don't you do a JDM conversion?" Well....

  9. #9

  10. #10
    nice pictures..!!
    My Mk4 is like a Black Hole you enter in it and who the hell knows what'll happen next???
    I sure don't, do you?

  11. #11
    Banned
    Join Date
    08-25-2005
    Location
    SLC, UT
    Posts
    762
    Thanks. I'd like to get some shots of all of the local cars, but I have to have somebody drive one of mine. The next ones at least will be of my new car.

  12. #12
    Senior TGC Member lonestar22's Avatar
    Join Date
    01-24-2005
    Location
    DFW/Stillwater
    Posts
    2,752
    Quote Originally Posted by WarmAndSCSI View Post
    Shouldn't have any problem fitting one, no? I can't obviously because I have piping that runs behind my IC. "Why don't you do a JDM conversion?" Well....
    if you look at my bumper, it sticks out about an inch in a half form my grill. behind the grill there is no room for anything it barely fits around my power steering cooler. i can remove that and use a smaller unit, but their still wouldnt be enough room. im either gonna use the OEM bumper or an old style vr4 bumper.
    RIP GALANT, GOOD MORNING BMW 330i

    330i ZSP (E90) - S4 (B5) / hellaflush

  13. #13

  14. #14
    Experienced TGC Member showtime's Avatar
    Join Date
    04-01-2008
    Location
    Tempe, Arizona
    Posts
    1,996
    beautiful!!!

    TJ, whats your suspension setup?
    Last edited by showtime; 04-24-2009 at 12:34 AM

  15. #15
    Banned
    Join Date
    08-25-2005
    Location
    SLC, UT
    Posts
    762
    Quote Originally Posted by showtime View Post
    beautiful!!!

    TJ, whats your suspension setup?
    Thanks.

    Well I'm dropped on Megan Street coilovers... but

    D3 Designs mid chassis brace
    D3 Designs rear chassis braces
    Eclipse GT OEM front strut tower bar
    Addco rear anti-sway bar - 22 mm
    Megan Racing rear lower tie bar (solid)
    Megan Racing Street coilovers
    Mevotech front endlinks (MUCH thicker than stock and better balljoints)
    Whiteline adjustable rear endlinks (fronts from an STi)

    BJ was slammed on Ksport coilovers in those pics. Not practical for everyday use. But I'm riding on 245/45R17's so they require less of a drop to fill up the wheel wells, thankfully.

  16. #16
    Member Rayth's Avatar
    Join Date
    06-02-2008
    Location
    North Shore, Boston MA
    Posts
    344
    good pics.. and that orange looks real good

  17. #17
    Experienced TGC Member showtime's Avatar
    Join Date
    04-01-2008
    Location
    Tempe, Arizona
    Posts
    1,996
    Quote Originally Posted by WarmAndSCSI View Post
    Thanks.

    Well I'm dropped on Megan Street coilovers... but

    D3 Designs mid chassis brace
    D3 Designs rear chassis braces
    Eclipse GT OEM front strut tower bar
    Addco rear anti-sway bar - 22 mm
    Megan Racing rear lower tie bar (solid)
    Megan Racing Street coilovers
    Mevotech front endlinks (MUCH thicker than stock and better balljoints)
    Whiteline adjustable rear endlinks (fronts from an STi)

    BJ was slammed on Ksport coilovers in those pics. Not practical for everyday use. But I'm riding on 245/45R17's so they require less of a drop to fill up the wheel wells, thankfully.
    Thank you, im just trying to figure out my suspension setup and I like your stance.

  18. #18
    Great pics! What was the lighting setup on the still shots? I love the rolling ones too. I'm quickly getting sucked in to photography haha

  19. #19
    Banned
    Join Date
    08-25-2005
    Location
    SLC, UT
    Posts
    762
    Some funky voodoo shit.

    Actually it said somewhere on my photographer's Flickr what lighting setup he used, but it's definitely a few external devices.

  20. #20
    Experienced TGC Member run1206's Avatar
    Join Date
    08-15-2006
    Location
    Perth Amboy, NJ
    Posts
    1,558
    nice pics! not used to seeing the FMIC stick out like that, but still looks pretty damn good :D
    awesome suspension setup too, i'm sick of springs and struts, gotta do coilovers soon

    02 Mit. Galant 5 Spd -> 2010 Mit. Lancer Sportback 5 Spd -> (current) 2014 Mit Evo GSR 5 Spd
    run1206's Rear Disc Tutorial
    run1206's CF Hood Resurface Tutorial

Page 1 of 3 123 LastLast

Tags for this Thread

Posting Rules

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •