The Galant Center - Powered by vBulletin

Thread: Compatibility

Showing results 1 to 10 of 10
  1. #1
    jlfisher360
    Guest

    Compatibility

    Ive searched the forums like everyone asks, but i cant seem to find the right answer. Will ALL parts from a 00-05 eclipse fit an 8g, or can it only be engine parts because i need to pick up some ignition cables and radiator hoses. And is the GS or RS Eclipse the compatible one?

  2. #2
    Engine and suspension parts from the 3g eclipse do fit. But I think that the radiator hose from the eclipse is too short. If you have a 4 cyl. the engine parts from the RS and GS fits. If you have a V6 then you can use the engine parts for the GT and GTS.

  3. #3
    jlfisher360
    Guest
    thanks. i found some nice Magnecor ignition cables for the 00 eclipse on pttuning, but where is a good place to get radiator hoses since the eclipse ones are too short?

  4. #4
    You are here entirely tooo much!! seth98esT's Avatar
    Join Date
    08-01-2002
    Location
    Keokuk, IA
    Posts
    8,348
    Stock? Advanced Auto.
    7g for life!

  5. #5
    jlfisher360
    Guest
    Not stock. I would prefer some red ones if I could find them.

  6. #6
    jlfisher360
    Guest
    and I also was just reading over the OBX header/downpipe combo thread and is a '99 2.4L I4 galant a fed or cali spec?

  7. #7
    It can be both fed and cali spec.

  8. #8
    From Ray's old thread

    Quote Originally Posted by RAZ_76 View Post
    Cali spec on the left and Fed spec on the right


    Fed left & Cali right
    Hope this helps you ID your header

    5-speed 6G72 w/ bolt-ons [sold]
    '93 Nissan 240sx vert

  9. #9
    no one makes aftermarket radiator hoses for the galant. The eclipse ones are too short. they also dont have the same "curve"

  10. #10
    jlfisher360
    Guest
    thanks for the picture, they really helped a lot.

Posting Rules

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •