The Galant Center - Powered by vBulletin

Thread: AGX's with Stock Springs..

Showing results 1 to 2 of 2
  1. #1
    Galant Ryder
    Guest

    AGX's with Stock Springs..

    Im planning on getting the eibach pro kit for my 7G. im gonna drop the front but i might just install the AGX's with stock springs in the back because it already looks dropped and im scared with the eibach spring it will drop it to a point where they wheel will be past the fender.. as of right now with a stock setup you can only see an inch to and inch and a half. with the eibach ill probably have a half an inch clearance. my question is will it be ok dropping the front with the Eibach springs and AGX's but just puting AGX's on the back??will the ride be stock in the back or should i go ahead and put on all the springs??

  2. #2
    Experienced TGC Member
    Join Date
    07-31-2002
    Location
    San Antonio, Tex-Mex
    Posts
    1,413
    hmmm.. I had the Eibach setup once so here's my opinion.

    Why is your back end so low already? Heavy sub box?

    The setup your talking about will work just fine. Eibach is as close to a stock feel as you can get. The AGX's will add a nice touch to the whole feel also.

    If it were me, I'd go Eibach all around because:
    1. The drop is not all that drastic
    2. You may regret not doing it later on
    3. the ride will be symetrical as far as body roll, damper, camber, and center of gravity. Center of gravity is the basis for which Eiback's are designed.
    4. why pay for all 4 when your only gonna use 2?

    It'll be a schweet setup either way :thumbsup:
    [b]<span style='color:blue'>Wes</span>
    The true path to enlightenment is Here
    <-Check it out Maz
    My 7g

    [b]<span style='color:darkred'>ClubTGC Shidoshi-Kai Fellowship</span>

Posting Rules

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •