I want to start on this project and i searched that the best one to use is one from an acura gsr I've searched on ebay and there's too many to choose from.
Can anyone show me a good intake kit that they have bought?
Thanks.
What are you looking to spend on an intake?
edit: didn't see this was for a 7g.
found some threads for you:
https://www.thegalantcenter.org/showthread.php?t=37375
https://www.thegalantcenter.org/showthread.php?t=17848
https://www.thegalantcenter.org/showthread.php?t=6450
Hope that helps.
Last edited by stvn_mj; 07-30-2009 at 08:42 PM
I've read those posts before but thanks anyway.
I'm just really looking for a cai that someone has used or recommends from ebay that requires little to no modification
I heard those were garbage:/
I found these:
http://cgi.ebay.com/ebaymotors/94-95...Q5fAccessories
http://cgi.ebay.com/ebaymotors/94-01...Q5fAccessories
http://cgi.ebay.com/ebaymotors/Cold-...Q5fAccessories
http://cgi.ebay.com/ebaymotors/Acura...Q5fAccessories
http://cgi.ebay.com/ebaymotors/94-95...Q5fAccessories
From what I read in those threads I posted the Acura upper pipe would work but I dont kno if the lower pipe would work fine. It might work though i'd say try it or try and make your own CAI.
didnt you look in the tutorial??? IT TELLS YOU EXACTLY WHAT TO GET AND EVEN WHERE TO GET IT. if that didnt help you idk wut will
2014 Lancer Evo GSR
1996 Galant S 5 Speed Turbo
Need a Turbo rebuilt or upgraded--> http://www.thegalantcenter.org/showt...ebuild-Service
Yeah I read it but I was asking for an opinion of which one i should get
ebay intake is garbage, stick with AEM, INJEN, or K&N, or even Weapon R over ebay intakeOriginally Posted by Joey Danger
its all the same metal you just pay for the sticker on it and the box.. buy an ebay intake.. i see so many hondas with them and they never have issues.. buy the one that looks like the kit in the tutorial
2014 Lancer Evo GSR
1996 Galant S 5 Speed Turbo
Need a Turbo rebuilt or upgraded--> http://www.thegalantcenter.org/showt...ebuild-Service
The weapon R intake is trash, its a short ram and IT IS NOT BOLT ON! It doesnt fit properly and you have to cut like 3/4 of the pipe off because it doesnt fit. Unless you relocate the battery. Which sounds like its more work than you are willing to do. Read the tutorials a little more in depth (I know...you read them) and just jump in. If you want a name brand...not that it will matter, then pick a proven name. Other wise just get piping and a filter of choice....the filter is actually the only part of the intake that matters
"Why fart and waste it when you can burp and taste it!"
ok I got it all figured out:D
I read that a metal MAS adapter is better, but I can't seem to find one. Does anyone know where I can get one?
One more thing, is it better to replace the intake vent hose on the crankcase with an air breather?
I have never been able o find one. I got one from Autobachs that was supposed to fit...it didnt. I had to return it
"Why fart and waste it when you can burp and taste it!"
check out my video
http://www.youtube.com/watch?v=7FKJhr5tyrg
i got my metal intake adapter on ebay for 10 bucks.. i did a short ram and im going turbo so i got the 2g turbo 4.5 inch metal adapter.. Slowboy Racing has then for like 12 bucks as well, but i have never seen a 3 inch 1
2014 Lancer Evo GSR
1996 Galant S 5 Speed Turbo
Need a Turbo rebuilt or upgraded--> http://www.thegalantcenter.org/showt...ebuild-Service
Would this adapter work?
http://cgi.ebay.com/ebaymotors/MITSU...Q5fAccessories
Sorry for all the questions.
Just want to make sure everything fits before installation
^^^ yup, that's the one. and with a shiny paintjob too!!! i prefer the metal ones over the plastic ones any day of the weak, mostly because, well, it's not crappy plastic, and the metal ones (like the one you linked) open up another 1.5" over the plastic.
Posting Rules
Log in
Register
Reply With Quote
Bookmarks