The Galant Center - Powered by vBulletin

Thread: Lower Ball Joint Replacement...

Showing results 1 to 16 of 16
  1. #1
    You are here entirely tooo much!! seth98esT's Avatar
    Join Date
    08-01-2002
    Location
    Keokuk, IA
    Posts
    8,348

    Lower Ball Joint Replacement...

    Is this something that really needs to be taken to a repair shop? or is it more of something i can do myself in a weekend? pretty sure my driverside lower ball joint needs replaced now(just had my passenger side LBJ replaced)...so manybrew anyone, should i take it to a shop or do it myself?
    7g for life!

  2. #2
    well, theyre covered under a recall, you know.
    unless youre has already been done. Actually, even if they have been, you could probably get mitsu to buy another one.


    yes, you could do it at home, but there are OFTEN problems with the wishbone (strut retainer) bolt siezing into its bushing. this requires cutting off of the bolt (a real pain in the ass), and a new bolt to be installed.

  3. #3
    You are here entirely tooo much!! seth98esT's Avatar
    Join Date
    08-01-2002
    Location
    Keokuk, IA
    Posts
    8,348
    alright, nearest mitsu dealer is like 3hours away :? ill just take it to a shop...

    Thanks man
    7g for life!

  4. #4
    Member
    Join Date
    07-31-2002
    Location
    FT. Lauderdale, FL
    Posts
    285
    fuck that, i would just drive, its free!!!
    "One good thing about music, when it hits you, you feel no pain." - Bob Marley

  5. #5
    Initial -G-host
    Guest
    Take your Galant to your nearest Mitsu dealer and they will replace the lower ball joint at no cost.....its a recall. All they will do is check your VIN number and take your keys put the car on a rack and you got you a new set of stronger lower ball joints and its even has a warranty. (At least mine said they did)

  6. #6
    Experienced TGC Member
    Join Date
    07-31-2002
    Location
    San Antonio, Tex-Mex
    Posts
    1,413
    BIG DEAL Seth, my Mitsu dealership is in Anchorage, which is about a 5-6 hour drive. I'm taking it there as soon as winter breaks.

    Free is good :thumbsup:
    [b]<span style='color:blue'>Wes</span>
    The true path to enlightenment is Here
    <-Check it out Maz
    My 7g

    [b]<span style='color:darkred'>ClubTGC Shidoshi-Kai Fellowship</span>

  7. #7
    optimus rhyme
    Guest
    im going tomorrow! are your ball joints squeeking alot also? The sound coming from mine is so aggravating. Also Im pretty sure the control arms are included in this recall. Does anyone know about this?

  8. #8
    IllestGalant
    Guest
    To answer your original question, if you have a floor jack, a blind monkey could change our lower ball joints. it is part of the whole
    arm. two bolts into the body and one locking nut to hold the threads of the ball joint to the bottom of the steering knuckle. really really easy, I did both of my lower arms in three minutes once I had the wheels off.

  9. #9
    You are here entirely tooo much!! seth98esT's Avatar
    Join Date
    08-01-2002
    Location
    Keokuk, IA
    Posts
    8,348
    awesome! i might still do it myself cause its not worth making time to make a day trip to get my car fixed...
    7g for life!

  10. #10
    <div class='quotetop'>QUOTE(seth)</div><div class='quotemain'>awesome! Â*i might still do it myself cause its not worth making time to make a day trip to get my car fixed...</div>
    did you NOT read my post?
    about how if the bolts are siezed (which happens about 50 percent of the time), it is a MAJOR pain in the ass?

    if the bolts are siezed, i would bet that you will NOT be able to remove them at home. you need an air source and some type of cut off wheel.
    then of course, you need new bolts.

  11. #11
    Experienced TGC Member
    Join Date
    01-10-2003
    Location
    BROOKLYN nYC
    Posts
    1,570
    angle grinder is the best toOl ever!

    Bolts siezed because of rust or just because theyre like overtorqued or missthreaded? My lower arm came off in about 5 min. No problems with any bolts, besides if he cant remove the bolts, then just take the new parts and head on over to the shop he was gona go to anyway no harm done.

    ;D
    Rob
    --------------------------------------------
    rIp 97 Galant
    starting over.
    90 Talon

  12. #12
    IllestGalant
    Guest
    well i have an air compressor, impact tools... and so on, I said I could do it in three minutes, I didn't say you could. come on you can handle it

  13. #13
    You are here entirely tooo much!! seth98esT's Avatar
    Join Date
    08-01-2002
    Location
    Keokuk, IA
    Posts
    8,348
    eh screw it, to the shop she goes :?
    7g for life!

  14. #14
    optimus rhyme
    Guest
    well i went to get my recall done. took the day off from work and all. they made me chill at the dealership for hours. i had no ride home and back to the place so i went to the mall down the street. after like 4 or 5 hours they called me and said they were not prepared to fix my car or some shit. even though i set an appointment and confirmed it. i was so pissed. i was like "whats up with a loaner car?" and they said nope. the most they could do was give me a free rental on the day they fix it (they should call me next week they said". anyway im pissed off. and my ball joints are squeeking like a pornstars bed. :darthgrin:

  15. #15
    TGC Super Hero evil-G-nius's Avatar
    Join Date
    08-01-2002
    Location
    North Bay...NorCal
    Posts
    2,552
    Id say take it. I took mine and the joint was frozen on. it had to be cut off. You live in an area with harsh winters, salt and snow, and rain it will fuck up the bolts that hold it together. That was my problem, I lived in Jersey at the time so I think you might have the same problem.


    "Why fart and waste it when you can burp and taste it!"

  16. #16
    Experienced TGC Member
    Join Date
    01-10-2003
    Location
    BROOKLYN nYC
    Posts
    1,570
    Quote Originally Posted by evil-G-nious (aka Kimya)
    Id say take it. I took mine and the joint was frozen on. it had to be cut off. You live in an area with harsh winters, salt and snow, and rain it will fuck up the bolts that hold it together. That was my problem, I lived in Jersey at the time so I think you might have the same problem.
    Thats why god invented 3foot breaker bars

    I live in nyc we pretty much have the same weather that jersey has non of my bolts on my car (except exhaust) are rusted on, I never had a problem removing anything wierd.
    Rob
    --------------------------------------------
    rIp 97 Galant
    starting over.
    90 Talon

Posting Rules

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •