Log in
Register
Reply With Quotenice! I don't know exactly how I feel about the wrinkle black valve cover just yet, but hey, it's your engine bay, not mine!
sweet!
nice! I don't know exactly how I feel about the wrinkle black valve cover just yet, but hey, it's your engine bay, not mine!
looks to me you have quite a nice set up how did you find all the parts and was it expesive to build all that? looks great i would love to be able to do something similar.
Im lovin the Valve Cover, looks Tits! LOL! I was thinkn of doin mine Flat Gunmetal wrinkle.
JDM Zenki Conversion
Lazy hands make for poverty, but diligent hands bring wealth. (Proverbs 10:4 NIV)
Thanx, well we will see how everything looks once inOriginally Posted by beam514
Yeahh I excited its finally done, it took time to find some parts here and there...you just gatta really look around. As far with the spending wise...haha well total of everything that Iv done to my car plus motor we are looking at close to $9,000. But I love my car and still holding on to her strong. Thanx alot man
Yeah Im really loving the look of it right now...its better seeinf it in person
Thanx alot all of you for the comments
Evo 8 ECU / 5 Speed Swap / Fully Built Forged Motor
Turbonetics Turbo T31 Stage 3 / RPW Stage 3 Camshaft
Pix of the HIDs!!!
Evo 8 ECU / 5 Speed Swap / Fully Built Forged Motor
Turbonetics Turbo T31 Stage 3 / RPW Stage 3 Camshaft
hey good job! keep it up! like what yah did to it
lookin good...
PLEASE take that pinstriping off! LOL!
JDM Zenki Conversion
Lazy hands make for poverty, but diligent hands bring wealth. (Proverbs 10:4 NIV)
Thanx alot guys!!!
Evo 8 ECU / 5 Speed Swap / Fully Built Forged Motor
Turbonetics Turbo T31 Stage 3 / RPW Stage 3 Camshaft
HAHAHA im working on it, its slowly already working its way pealing off, maybe next week end ill take care of it.
Evo 8 ECU / 5 Speed Swap / Fully Built Forged Motor
Turbonetics Turbo T31 Stage 3 / RPW Stage 3 Camshaft
LOL! Sounds good!
JDM Zenki Conversion
Lazy hands make for poverty, but diligent hands bring wealth. (Proverbs 10:4 NIV)
My first time lookin' at your project. Nice ride and keep up the good work.
Ok guys just wanna give everyone an update on whats going on with the car. Everything is set and reay to go...Me and couple of friends are going to start getting the stock motor out of the car and gtting the beast in. If everything works out the way its sup to it should only take a good 2 weeks due to me working doring the day. I will be getting pix and videos up soon. Starting tom.
Wish me luck everyone!!!
Evo 8 ECU / 5 Speed Swap / Fully Built Forged Motor
Turbonetics Turbo T31 Stage 3 / RPW Stage 3 Camshaft
well dam man ill be out of the army by the time you get done with this simple engine swap
j/k good luck man
haha yeah I know its been some time, but I also had work and school to take care of at the same time of spending money and working on the car. But yes finaly I have good time to really get it finished. Thanks
Evo 8 ECU / 5 Speed Swap / Fully Built Forged Motor
Turbonetics Turbo T31 Stage 3 / RPW Stage 3 Camshaft
Just adding some more pix to the collection here =)
This is another car we are working on...again with the Mustang GT.lol First my friend had 750 HP with the Cobra motor that was supercharged, but just wasn't enough for him so he wanted to re-build a motor that's twin turbo and the motor that is built to handle 1200 HP.lol Crazy kid.
Side view
Talking about TB...look at his 75mm each.lol
My new toy thanx to my buddy
AEM Evo 8 fuel rail
Short shifter
Evo 8 TB I will be trying out
3g 5 speed M/T using ACT clutch
Mishimoto Evo 8 Radiator
Boomslang connector for stock Evo 8 ECU
RC Injectors 750cc
Well we have started on pulling the motor out and will get pix up of that also, just waiting for the weekend to come so we can finish up. Hopefully everything will work out and I can get this baby done before September.lol
Last edited by Galantfan88; 08-04-2010 at 11:37 AM
Evo 8 ECU / 5 Speed Swap / Fully Built Forged Motor
Turbonetics Turbo T31 Stage 3 / RPW Stage 3 Camshaft
Just some more pix on my friends Mustang build and will soon get some more of mine up soon.
Evo 8 ECU / 5 Speed Swap / Fully Built Forged Motor
Turbonetics Turbo T31 Stage 3 / RPW Stage 3 Camshaft
Update on whats been going on guys, I know its been taking some time like I said due to school and work in the way. So we been trying to get this work done and hopefully we will be able to finish in the next couple of days and get this baby started, but here is some pictures I took from last night. Right now motor is in and M/T is in and everything fit perfectly. The only problem we have ran into is that the turbo is pretty big and so is the radiator.lol They are pretty damn close so we are trying to figure out how or where to run the fans. The last thing I wanna do is get another exhaust manifold but well try to figure something out, and the other thing is that the turbo dosnt spin freely and it might have to be re-built but like I said when the car starts up we will see what needs to be fixed and moved.
I know everything looks like a mess but after everything is done we are going to clean everything. Please leave me some comments and if any questions please ask
Evo 8 ECU / 5 Speed Swap / Fully Built Forged Motor
Turbonetics Turbo T31 Stage 3 / RPW Stage 3 Camshaft
Looking good :D :D
LoL It seems like ur gonna have a problem with the fittings of the fan :P
Posting Rules
Bookmarks