Turbo Gurus....Need an Advice

[DOHCstunr]

I installed a check valve between my PVC and intake manni.
Made a world of difference in spoolup and eliminated a massive boost leak.
(also helps with blowby)

I bought one of these a couple years ago:
http://www.usplastic.com/catalog/pro...uct%5Fid=15641
made all of the difference.

They have these now, pretty damn cool:
http://www.usplastic.com/catalog/pro...oduct_id=20411
if thats the size you need.

[mko]

Ok, so I went to the parts store and got 1g PCV valve that is actually sealing . So I did this:

I hollowed out the stock PCV by cutting the bottom of it and then attaching the 1g PCV to it.





Itll run with this until I get the check valve in the mail.

[Shadow19]

Where is your intake pipe? I didnt see that. Good build though. I cant wait for all of my shit to come in the mail SOON! Then i shall be BOOOOOOOOOOOOOOOSTTTTTTTTEEEEEEEEEEDDDDDDDDD

[Galanttuner10]

when you run the MAFT as a blow thru setup you dont need an intake pipe.. im goin to use just a filter over the inlet if i go with MAFT

[Shadow19]

when you run the MAFT as a blow thru setup you dont need an intake pipe.. im goin to use just a filter over the inlet if i go with MAFT

I 100% understand that. I just didnt see a filter or intake pipe so i wanted to ask.