The Galant Center - Powered by vBulletin

Thread: mrg7243's 2001 galant build

Page 1 of 6 12345 ... LastLast
Showing results 1 to 20 of 108
  1. #1
    Senior TGC Member mrg7243's Avatar
    Join Date
    11-29-2009
    Location
    Chadds Ford, PA
    Posts
    2,768

    Icon10 mrg7243's 2001 galant build

    Just got my first part in today so i figured why not start a build thread.
    here is what i have, ordered, or would like to put on the car
    Engine
    OBXr Racing coil packs-Big Issue with
    EVO Head
    Spectre open air filter-Done
    Ebay Cold Air
    2.5" Megan DRift Spec
    Boosted one day

    Braking/Handling
    EVO Brembos
    Bigger Discs
    KYB Shocks
    Megan Springs
    Strut tower brace


    Interior
    EVO Seats
    EVO Stearing wheel
    various parts carbon fibered taped(yeah i am that cheap)-Did the fog light/Mirror panel and look ok

    Exterior
    EVO 9 wing
    EVO rims
    Projector Lights
    Lowered

    I have a 2001 Galant ES 4g64, it got it for free. lucky me, It has been side swipped, the rear doors are a b**** to open, the gas door is half falling off, and i think that is it. So i have alotta work ahead of me on this.

    Pics-Sorry I don't have any of the car yet, i should have them by the end of the week.

    My Coils




    Thats all for now
    Matt
    Last edited by mrg7243; 01-02-2010 at 04:15 PM

  2. #2
    blue8g
    Guest
    this COULD be dope

    i mean that this has potential.......lol
    Last edited by blue8g; 12-13-2009 at 01:15 AM

  3. #3
    Senior TGC Member mrg7243's Avatar
    Join Date
    11-29-2009
    Location
    Chadds Ford, PA
    Posts
    2,768
    Dope??? nope no marijuana here lol what do you mean by dope?
    Hell yeah it has potential
    Last edited by mrg7243; 12-19-2009 at 11:46 AM

  4. #4
    he is a post whore don't worry about him

    1996 galant s
    finishing up my 2.4L DOHC, 10.5:1, precision sc60, meth injected MONSTER.

  5. #5
    Let me know how those coilpacks work for you.
    Jigz-TGCIL Sosick Motorsports

    R.I.P. Christopher "CRAZY CHRIS" Beckmann
    "you dont appreciate friendship until you lose your bestfriend...."
    I'd rather have the knowledge and ability to do it than the money to buy it already done.

  6. #6
    Senior TGC Member mrg7243's Avatar
    Join Date
    11-29-2009
    Location
    Chadds Ford, PA
    Posts
    2,768
    I will, they will be installed either wedsday of thursday.

  7. #7
    Experienced TGC Member Galantfan88's Avatar
    Join Date
    12-02-2008
    Location
    Carteret & Manalapan, NJ
    Posts
    1,263
    Yeah deff let us know about them cuz I was looking into them but wasnt sure, so your our tester.lol

  8. #8
    Senior TGC Member mrg7243's Avatar
    Join Date
    11-29-2009
    Location
    Chadds Ford, PA
    Posts
    2,768
    Lol glad to know im the guinie pig lol

  9. #9
    Senior TGC Member mrg7243's Avatar
    Join Date
    11-29-2009
    Location
    Chadds Ford, PA
    Posts
    2,768
    Well i got some stuff done to my car the past weeks,
    Spectre air filter( i love it)
    NGKr iridum plugs
    I had a no start issue, so i pulled the starter, it tested all good, changed the batterey terminals and 3 fuses and she started right up.
    I tested the OBX coil packs, i cant say anything good since my one coilpack melted when i started it. So i will be contacting the company and trying to get a replacement, the other one though didnt melt.
    I painted the fins on the grill flat black
    Sorry if the pics are bad the are cell phone pics.
    melted coil pack


    Grill
    Before

    After

    ON car


    Airfilter


    And i love this pic but the hood needs to be shut along with the grill in place
    [IMG]http://i1020.photobucket.com/albums/...1231091430.jpg[/IMG]

  10. #10
    Quote Originally Posted by mrg7243 View Post
    melted coil pack
    HOLY SHIT ON A STICK BATMAN!
    i'll be staying the hell away from those just in case, that thing didn't melt, it vaporized.
    Poison457
    99 ES 4G64 I4 189k miles and still going strong
    5spd, rear disk swaped,
    Quote Originally Posted by Abd al-Hazir View Post
    I am at a loss to explain the average skeleton's somewhat ludicrous mental predisposition, however. Perhaps the implausibility of its own existence makes the skeleton think it hilarious to hide in a barrel, cackling intermittently for some three hundred years until a victim happens by?

  11. #11
    Yeah just like in my build thread the obx coils are crap! And so is their company. Mine just won't fire at all. Direct injection my behind.
    The "Tumbler" Is Here
    Stock Longblock/Stock PCM | Custom Garrett 50-1 | 17 Psi | Weighing 2xxxLbs
    3xxWHP/3xxWTQ [Current]

  12. #12
    Experienced TGC Member Galantfan88's Avatar
    Join Date
    12-02-2008
    Location
    Carteret & Manalapan, NJ
    Posts
    1,263
    WTF!!!! How the hell did that melt??? Are you sure you want to keep using them if the coil pack melted? Im having real big second thoughts on this....did it do alot of damage on the inside of the motor?

  13. #13
    Senior TGC Member 03-Galant-ES's Avatar
    Join Date
    01-08-2008
    Location
    Levittown NY
    Posts
    2,786
    Quote Originally Posted by Galantfan88 View Post
    WTF!!!! How the hell did that melt??? Are you sure you want to keep using them if the coil pack melted? Im having real big second thoughts on this....did it do alot of damage on the inside of the motor?
    thats what I was wondering too, how is it where the coil pack melted?

    What have you ordered so far out of your list? I think its something to work for. Are you going NA or FI?

  14. #14
    Experienced TGC Member Galantfan88's Avatar
    Join Date
    12-02-2008
    Location
    Carteret & Manalapan, NJ
    Posts
    1,263
    Quote Originally Posted by 03-Galant-ES View Post
    thats what I was wondering too, how is it where the coil pack melted?

    What have you ordered so far out of your list? I think its something to work for. Are you going NA or FI?
    Well as for ignition goes I haven't got anything for it yet cuz Im looking around to see if there is anything out there to upgrade the coil packs but as fo what I see....no.lol the only thing I have right now is HKS twine fire for the build.

  15. #15
    Senior TGC Member mrg7243's Avatar
    Join Date
    11-29-2009
    Location
    Chadds Ford, PA
    Posts
    2,768
    The other coil fired, since the spark plug shows very slight wear, the one that melted did not fire.

    I am still going to use them unless i have another melt on me, luckily there was no damage to the motor my spark plug had a little bit of melted rubber from the boot, but i peeled that of and was able to still use the plug. I put stock packs back on and they fired fine so there is no damge that i know of. the tube leading down to the spark plug is undamaged thankfully. i caught it in time i heard a tapping when i started it. shut the motor off immediatly and pulled it, and thats what i found.

    I havent ordered much yet, sometime down the road i would like to go turbo, first things first i need a 5-speed since the automatice slippps reeeaaallly bad, after that i will see where things take me. so i will probably be NA for awhile, untill i get the money to swap, with an evo.

    Do you like the HKS twin fire??? also how hard was it to setup???

  16. #16
    dude, fuck those coilpacks. Just use the OEM ones.
    Jigz-TGCIL Sosick Motorsports

    R.I.P. Christopher "CRAZY CHRIS" Beckmann
    "you dont appreciate friendship until you lose your bestfriend...."
    I'd rather have the knowledge and ability to do it than the money to buy it already done.

  17. #17
    Experienced TGC Member Galantfan88's Avatar
    Join Date
    12-02-2008
    Location
    Carteret & Manalapan, NJ
    Posts
    1,263
    Thats what Im going to do, just use stock....really dont wanna fuck this up

    Evo 8 ECU / 5 Speed Swap / Fully Built Forged Motor
    Turbonetics Turbo T31 Stage 3 / RPW Stage 3 Camshaft

  18. #18
    Senior TGC Member mrg7243's Avatar
    Join Date
    11-29-2009
    Location
    Chadds Ford, PA
    Posts
    2,768
    thats what im thinking, but the vendor i bought them from went outta business so i contacted OBX directed to see what i can do.

  19. #19
    Experienced TGC Member Galantfan88's Avatar
    Join Date
    12-02-2008
    Location
    Carteret & Manalapan, NJ
    Posts
    1,263
    Quote Originally Posted by mrg7243 View Post
    thats what im thinking, but the vendor i bought them from went outta business so i contacted OBX directed to see what i can do.
    Let me know what they say back to you...cuz you should deff let them know that the coil packs they make are junk, and one day going to damage someones engine really bad

    Evo 8 ECU / 5 Speed Swap / Fully Built Forged Motor
    Turbonetics Turbo T31 Stage 3 / RPW Stage 3 Camshaft

  20. #20
    Senior TGC Member mrg7243's Avatar
    Join Date
    11-29-2009
    Location
    Chadds Ford, PA
    Posts
    2,768
    Yeah man i will, i am still counting my lucky stars that there was no damage, amd i am no sure if the coil packs themselves are junk, just the one was. I am hoping to gett my money back, or atleast a replacment.

Page 1 of 6 12345 ... LastLast

Posting Rules

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •