The Galant Center - Powered by vBulletin

Thread: Viper 5701 problems

Showing results 1 to 7 of 7
  1. #1

    Viper 5701 problems

    I had a Viper 5701 pink installed into my 03' Galant. It wasn't working I took it to best buy and after having it reinstalled it worked fine but now I'm having issues again. It's been very cold over night (20's) and cold the last few days. This morning I tried to start it and got nothing. I used the two-way and after I pressed the remote start button the f (function) button beeped and the red light next to it came on. Car lights flashed 8 times. Whats going on? Any solutions? After driving to the grocery store the remote start worked fine while I was standing in line to leave. That was after about an hour of shopping.

  2. #2
    the starting/cranking time is too short. check the manual on how to increase the cranking time.

  3. #3
    Well it was installed. I know you can normally do it through the remote, yes?

  4. #4
    Experienced TGC Member fliegendaffe's Avatar
    Join Date
    01-10-2008
    Location
    Oceanside/Camp Pendleton, CA
    Posts
    1,848
    Quote Originally Posted by Winter03 View Post
    Well it was installed. I know you can normally do it through the remote, yes?
    incorrect. the only 2 ways you can do it is with a bitwritter or a combo valet button and remote

  5. #5
    I have a 2-way and a 1 way remote. How would I adjust the crank time?

  6. #6
    Experienced TGC Member fliegendaffe's Avatar
    Join Date
    01-10-2008
    Location
    Oceanside/Camp Pendleton, CA
    Posts
    1,848
    Quote Originally Posted by Winter03 View Post
    I have a 2-way and a 1 way remote. How would I adjust the crank time?
    Quote Originally Posted by fliegendaffe View Post
    incorrect. the only 2 ways you can do it is with a bitwritter or a combo valet button and remote
    plus read the manual on top of it

  7. #7
    TGC Regular Gladiator's Avatar
    Join Date
    03-19-2003
    Location
    Rego Park Queens
    Posts
    443
    Quote Originally Posted by Winter03 View Post
    I have a 2-way and a 1 way remote. How would I adjust the crank time?
    I had the same problem, you could just go back to where you got it installed. They can change it in a few secs.

Posting Rules

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •