The Galant Center - Powered by vBulletin

Thread: 6A13 Connecting Rods

Showing results 1 to 4 of 4
  1. #1

    6A13 Connecting Rods

    Is there any forged rods for 6A13 engine?
    I am looking to build up the motor.
    Not sure if any rods are interchangeable with them.
    Thanks!

  2. #2
    TGC Regular
    Join Date
    12-14-2006
    Location
    New Zealand
    Posts
    823
    Not off the shelf no, there are a couple you can use, but you have to trim the bottom of the block so they don't hit it.
    1994 Galant VR-4 GOKUH ( 230kw atw )
    2000 Legnum VR-4 ( Daily, 155.5kw atw )
    1997 Legnum VR-4 - Yes Another one
    1995 FTO - V6 Mivec 200hp

  3. #3
    Quote Originally Posted by Goku View Post
    Not off the shelf no, there are a couple you can use, but you have to trim the bottom of the block so they don't hit it.
    Do you mind telling me which applications are those rods from? Thanks!

  4. #4
    TGC Regular
    Join Date
    12-14-2006
    Location
    New Zealand
    Posts
    823
    You know... I can't fully remember..

    is yours a 6A13TT, or just a 6A13 ?

    As there is a place that is going to make them is they can get 6 orders in, here

    http://ozvr4.com/forums/showthread.php?t=8164
    1994 Galant VR-4 GOKUH ( 230kw atw )
    2000 Legnum VR-4 ( Daily, 155.5kw atw )
    1997 Legnum VR-4 - Yes Another one
    1995 FTO - V6 Mivec 200hp

Posting Rules

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •