The Galant Center - Powered by vBulletin

Thread: Sportmax aka XXR Wheels

Page 1 of 2 12 LastLast
Showing results 1 to 20 of 23
  1. #1
    You are here entirely tooo much!!
    Join Date
    05-02-2008
    Location
    Hacienda Heights, CA
    Posts
    3,014

    Sportmax aka XXR Wheels

    I just wanted to get some info on these. I'm interested on some in the future but there are no threads about this. Please let me know what you know about this brand of wheels. My friend has an RX-7, he has these and has hit curbs a hand full of times an the paint has only chipped off so they seem legit so far for me lol

    Quote Originally Posted by IVORY_G View Post
    never pull out, always squeeze inside! LOL!

  2. #2
    blue8g
    Guest
    ewww status, gross, yuckies, barf

    Rotas > Sportmaxx

    These are the most played out wheels in the world

    http://honda-tech.com/showthread.php?t=1810618&page=532

    1/2 the wheels in this thread are sportmaxx's, the other half are peope with better wheels hating on the sportmaxx's

  3. #3
    You are here entirely tooo much!!
    Join Date
    05-02-2008
    Location
    Hacienda Heights, CA
    Posts
    3,014
    im asking about the quality, not your opinion on how they look. thank you. im not looking at the honda type rims or i would just trade out to a honda if i wanted to

    Quote Originally Posted by IVORY_G View Post
    never pull out, always squeeze inside! LOL!

  4. #4
    You are here entirely tooo much!! IVORY_G's Avatar
    Join Date
    07-12-2007
    Location
    SoCal
    Posts
    4,632
    Pics? Specific name or part #? There's a whole line of XXR's...
    JDM Zenki Conversion

    Lazy hands make for poverty, but diligent hands bring wealth. (Proverbs 10:4 NIV)

  5. #5
    You are here entirely tooo much!!
    Join Date
    05-02-2008
    Location
    Hacienda Heights, CA
    Posts
    3,014
    http://www.xxrwheels.com/sportmax_962.shtml#

    these were the ones i was looking into. i haven't really seen gold wheels with lips that look good then i came up on these. these look good and aren't that expensive either

    Quote Originally Posted by IVORY_G View Post
    never pull out, always squeeze inside! LOL!

  6. #6
    They look good to me. VIPTint has Sportmax's on his Galant. I think their offset are too low though, you'll need to run a lot of negative camber.
    Jigz-TGCIL Sosick Motorsports

    R.I.P. Christopher "CRAZY CHRIS" Beckmann
    "you dont appreciate friendship until you lose your bestfriend...."
    I'd rather have the knowledge and ability to do it than the money to buy it already done.

  7. #7
    blue8g
    Guest
    quality is the same as any other cheap knock-off

  8. #8
    Senior TGC Member ricky_db's Avatar
    Join Date
    03-12-2007
    Location
    Dallas TEXAS
    Posts
    2,041
    never heard of them

  9. #9
    Quote Originally Posted by blue8g View Post
    quality is the same as any other cheap knock-off
    Cody, have you ever had any cheap knockoff wheels? or are you just going with what all those people who shit out money say?

    Not all "knock-offs" are poorly built or made. Believe it or not, some of them are decent, I'm not saying they are better than Volks, Works, etc. I'm not saying all "Knock off" manufacturers are durable cuz I admit, some of them might as well be made with paper but some of them are actually pretty durable. Take Rotas for instance, people always hate on Rotas blah blah blah but half of them have never rolled on Rotas. AMS were racing with Slipstreams back when their EVO was still silver.

    Not to mention, almost EVERYONE in the Philippines rock Rotas, because thats where they are made and I know a lot of people back home who still roll on their ten-year old Rotas. And if you've ever been to the Philippines, if wheels will bend or crack, it would be on Philippine roads.

    Try it before you knock it, some people cant afford to drop THOUSANDS of dollars for a set of wheels.
    Jigz-TGCIL Sosick Motorsports

    R.I.P. Christopher "CRAZY CHRIS" Beckmann
    "you dont appreciate friendship until you lose your bestfriend...."
    I'd rather have the knowledge and ability to do it than the money to buy it already done.

  10. #10
    Experienced TGC Member johnygezony's Avatar
    Join Date
    10-05-2008
    Location
    Grand Rapids Michigan
    Posts
    1,141
    I have never heard anything bad about rotas, i always liked their simple 5spokes.

  11. #11
    blue8g
    Guest
    Quote Originally Posted by 4g63lover View Post
    Cody, have you ever had any cheap knockoff wheels? or are you just going with what all those people who shit out money say?

    Not all "knock-offs" are poorly built or made. Believe it or not, some of them are decent, I'm not saying they are better than Volks, Works, etc. I'm not saying all "Knock off" manufacturers are durable cuz I admit, some of them might as well be made with paper but some of them are actually pretty durable. Take Rotas for instance, people always hate on Rotas blah blah blah but half of them have never rolled on Rotas. AMS were racing with Slipstreams back when their EVO was still silver.

    Not to mention, almost EVERYONE in the Philippines rock Rotas, because thats where they are made and I know a lot of people back home who still roll on their ten-year old Rotas. And if you've ever been to the Philippines, if wheels will bend or crack, it would be on Philippine roads.

    Try it before you knock it, some people cant afford to drop THOUSANDS of dollars for a set of wheels.
    nope I haven't used knock-offs, I guess I can't say anything about quality, I just hate what they are, IMO knock-off wheels are ruining the 'tuner car' world

    Quote Originally Posted by johnygezony View Post
    I have never heard anything bad about rotas, i always liked their simple 5spokes.
    those are the slipstreams.......knockoff spoon sw388 or desmond regamasters

  12. #12
    Quote Originally Posted by blue8g View Post
    nope I haven't used knock-offs, I guess I can't say anything about quality, I just hate what they are, IMO knock-off wheels are ruining the 'tuner car' world
    enlighten me on why you think that?

    If anything, they've helped the "Tuner car" community. With, decent knockoffs people who want to be a part of the community can finally play. Especially people your age, people who cant afford the $1300 for Regamasters or real Spoon SW's. I know you have G-games, but some people aren't as lucky.
    Jigz-TGCIL Sosick Motorsports

    R.I.P. Christopher "CRAZY CHRIS" Beckmann
    "you dont appreciate friendship until you lose your bestfriend...."
    I'd rather have the knowledge and ability to do it than the money to buy it already done.

  13. #13
    Experienced TGC Member johnygezony's Avatar
    Join Date
    10-05-2008
    Location
    Grand Rapids Michigan
    Posts
    1,141
    Like me !

  14. #14
    You are here entirely tooo much!!
    Join Date
    05-02-2008
    Location
    Hacienda Heights, CA
    Posts
    3,014
    i don't want to start an argument thread. I'm asking members who had experience with them or have feedback on this brand please enlighten me. if you don't know then don't reply and move on and keep your comments to yourself. thank you

    Quote Originally Posted by IVORY_G View Post
    never pull out, always squeeze inside! LOL!

  15. #15
    I have experience with them, My buddy used his Sportmax's everyday on his 240. Drove it EVERYWHERE. Drifted and road raced with it as well, they held up fine. And as I said, ask VIPtint. He's got a set of Sportmax's on his Galant.
    Jigz-TGCIL Sosick Motorsports

    R.I.P. Christopher "CRAZY CHRIS" Beckmann
    "you dont appreciate friendship until you lose your bestfriend...."
    I'd rather have the knowledge and ability to do it than the money to buy it already done.

  16. #16
    You are here entirely tooo much!!
    Join Date
    05-02-2008
    Location
    Hacienda Heights, CA
    Posts
    3,014
    kool, thank you. i checked out the Rotas Wheels like Blue8G suggested, but its like 80 bucks more per wheel for a similar style but not the same as what im looking at. anybody else??

    Quote Originally Posted by IVORY_G View Post
    never pull out, always squeeze inside! LOL!

  17. #17
    blue8g
    Guest
    Quote Originally Posted by E_Emerson88 View Post
    kool, thank you. i checked out the Rotas Wheels like Blue8G suggested, but its like 80 bucks more per wheel for a similar style but not the same as what im looking at. anybody else??
    well what kind of wheel are you looking for? a simple five spoke or what? give me a budget and i can find you a sexy set for crazy cheap......oh and size and offset

  18. #18
    blue8g
    Guest
    Last edited by blue8g; 01-03-2010 at 10:49 PM

  19. #19
    You are here entirely tooo much!!
    Join Date
    05-02-2008
    Location
    Hacienda Heights, CA
    Posts
    3,014
    im looking for a simple 5 spoke gold wheels with a lip. im not really looking into high end wheels. a couple people had their wheels stolen because they were VS and Volks wheels in my neighborhood. so something that looks nice but doesn't tempt people to steal it lol. im just doing some research right now anyways on this brand not gonna buy anytime soon
    Last edited by E_Emerson88; 01-03-2010 at 11:35 PM

    Quote Originally Posted by IVORY_G View Post
    never pull out, always squeeze inside! LOL!

  20. #20
    blue8g
    Guest
    ^lol people will steal anything, i've heard tons of stories of stolen stock wheels lmao.....just get a set of 20 locks, all with different keys lmao

Page 1 of 2 12 LastLast

Posting Rules

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •