The Galant Center - Powered by vBulletin

Thread: Transmission swap cost.

Showing results 1 to 16 of 16
  1. #1
    Experienced TGC Member
    Join Date
    10-18-2007
    Location
    Glen Burnie, MD
    Posts
    1,314

    Transmission swap cost.

    Transmission $106 (Junkyard ,snuck out the flywheel with it hehe)
    Shifter Cables $120 (Dealer)
    Clutch Pedal $35 (Remarque member tgc)
    Shifter Assy. $15 (Junkyard)
    Clutch & PP $135 (eBay)
    SS Clutch Line & Fittings for line $60 (Summit Racing)
    Master Cyl $45 (Bronxbombr member TGC)
    Slave Cyl $35 (Rock Auto)
    Shiter Knob $12 (eBay)
    Flywheel Bolts $28 (Dealer)
    M/T Mount $80 (eBay)
    Redline MT-90 Trans Fluid $44 (Local Shop)
    Random Bolts $20 (Local hardware store)

    TOTAL $735

    Optional:

    New axle $80 (Tore the boot on one of my old ones)
    DC Sports STB $95 (eBay)
    Megan Racing Coilovers $Trade+Shipping $71 (Racenos member TGC)
    Megan Lower Rear Strut Brace $76 (Megan racing site)
    Polyurethane Motor Mounts $77 (eBay)

    Opt. Total $399


    So how much did you other 8g swap guys spend?
    03 ES 5spd--Rota torque gloss black 17x8 et. 35--Hankook Ventus V12 evo 235/45/17--D2 coilovers--DC Sports STB--Intake--Brembo calipers--Powerslot Rotors--Stoptech Pads--SS brakes lines--35% tint--5k heads & 5k fogs--Alpine headunit--Kicker 400w amp--Alphasonix sub

  2. #2
    3G trans $160
    clutch/brake pedals and shifter $90
    Clutch $160
    Flywheel $110
    Shifter cables $60
    Flywheel washer (ended up not using it) $5
    Flywheel bolts $35
    shift select arm $25
    shift select shoe $5
    Shift cable bracket $67
    trans mount $25
    Slave Cylinder $30
    Master Cylinder $30
    SS Line $45
    Fittings $6
    Brake Fluid $7
    9 Quarts of gear/MTL $55 (dont do this, go to synchromesh right away!) lol

    $915. Damn, now that I listed all of them out I guess i did come close to my planned budget

    optional
    shift boot $12 (shipping, the boot itself was free)
    shift knob $40 (gf's xmas present)
    GS-T 16" wheels $200 (moms xmas present)

    $252 of freebies basically. lol.

    Looks like I might spend another 350-500 on a trans rebuild though =/
    Jigz-TGCIL Sosick Motorsports

    R.I.P. Christopher "CRAZY CHRIS" Beckmann
    "you dont appreciate friendship until you lose your bestfriend...."
    I'd rather have the knowledge and ability to do it than the money to buy it already done.

  3. #3
    You are here entirely tooo much!! Jeffylou87's Avatar
    Join Date
    01-19-2007
    Location
    Lyndhurst, NJ
    Posts
    3,473
    Roughly 1K. I upgraded everything I could while the car was apart. Fidanza flywheel, short shifter, base bushings, cable bushings, exedy clutch kit, etc.

  4. #4
    Experienced TGC Member Galantfan88's Avatar
    Join Date
    12-02-2008
    Location
    Carteret & Manalapan, NJ
    Posts
    1,263
    Same here I would say I spent about 1,300.00 cuz it came with everything that I needed and that includes ACT clutch and a Fidanza flywheel from Roman, which was funny cuz it looked like we were doing a drug deal...dark alley way with him taking something out of the trunk and me handing him the money.lol

    Evo 8 ECU / 5 Speed Swap / Fully Built Forged Motor
    Turbonetics Turbo T31 Stage 3 / RPW Stage 3 Camshaft

  5. #5
    You are here entirely tooo much!! beam514's Avatar
    Join Date
    05-03-2007
    Location
    Socal/Central Coast
    Posts
    3,803
    Transmission: total spent $1300 +
    [x] F5M51 5-speed manual transmission <$600>
    [x] OEM Resurfaced Flywheel <$86>
    [x] shifter assembly
    [x] used shifter cables
    [x] Aluminum shift knob <$23>
    [ ] shift boot
    [x] SPEC stage 1 clutch kit <$327>
    [x] slave cylinder (also have an extra one)
    [x] master cylinder <$27>
    [x] transmission mount
    [x] hydraulic lines <$90>
    [x] Manual Starter Locator Plate
    [x] intermediate shaft <$150>
    [x] clutch pedal
    [x] Pennzoil Synchromesh

    pasted from the first post in my build thread:
    https://www.thegalantcenter.org/show...61&postcount=1
    you can see what else I've spent money on :)

  6. #6
    You are here entirely tooo much!! Stewi's Avatar
    Join Date
    08-04-2003
    Location
    NY
    Posts
    4,344
    Man I did this a longggggggggg time ago....

    The first G I spent around $1200 on all the parts, I cant remember the breakdown.

    The second G I spent substantially less because I bought two complete 5 speed swaps from the same junkyard, one set for me, one for XD_01 and it was like $1600 total with shipping. So I only paid half since we split it......
    Quote Originally Posted by qnz
    well there are talkers and there are do'ers. talkers never do. and do'ers never talk
    99' Galant ES
    4G64/63T
    AEM EMS

  7. #7
    lets see i went to the jy and pulled every thing yes every thing except the flywheel for 180. bought eclipes fly/clutch set for a 110 then bout a sonta fly wheel for 100.

    about $400 total after not including the fluids. should be $250-300 after i sell the eclipes set.

    Only sonata f5m42 swapped. N/A build in motion.

  8. #8
    Tranny With lil under 30K $889 Shipped
    Act 2100 Clutch & Act XACT Streetlite Flywheel $540 Shipped
    UH Shifter Bushing Kit $33.89 Shipped
    Short Shifter Kit $42.00 Shipped
    NEW Slave Cylinder Part#MR470217 $79.00
    NEW 2G Starter $115
    NEW upper tranny mount $85


    Bolts needed
    Flywheel bolts Part#MD302074 $25.83
    Presure Plate Bolts Part#MF241251 $7.84

    OPTIONAL
    Since my Studs on tranny were rusted got new ones
    Studs Part#MD759556 13.32

    With labor, Hotel and food and tolls n all that..
    Total....$2352.77
    00 Galant ES Turbo/5-Speed
    13 GTR

  9. #9
    3G trans $400- will be close to 900 cuz ups broke it in shipping... another $400 for the bell housing...
    clutch/brake pedals, shifter, cables, clutch lines, slave and master. $100
    Clutch $286
    Flywheel $386
    Shifter cables- bent the ones i had lol... Got new ones.. $90
    Slave Cylinder $30
    Master Cylinder $60
    Brake Fluid $7
    3 Quarts of Synchromesh $30

    Wow $1389. and about $500 on it when i'm done....

  10. #10
    Experienced TGC Member
    Join Date
    10-18-2007
    Location
    Glen Burnie, MD
    Posts
    1,314
    Well add another $636 since I had to buy a second one LOL.
    03 ES 5spd--Rota torque gloss black 17x8 et. 35--Hankook Ventus V12 evo 235/45/17--D2 coilovers--DC Sports STB--Intake--Brembo calipers--Powerslot Rotors--Stoptech Pads--SS brakes lines--35% tint--5k heads & 5k fogs--Alpine headunit--Kicker 400w amp--Alphasonix sub

  11. #11
    Experienced TGC Member
    Join Date
    04-02-2009
    Location
    Denver Colorado
    Posts
    1,447
    5spd Trans
    Clutch/Brake Pedals
    Master and Slave Cylinder
    Speed Sensor
    03 MT ECU

    $223 :P


    Still have to get new axles, and already had the shifter and cables installed in my car (about another $70 I think is what I paid).

    3G Eclipse Performance & Development - Denver, Colorado
    www.blackheartmotors.net

  12. #12
    TGC Regular bsilver23's Avatar
    Join Date
    04-06-2009
    Location
    Mequon, Wisconsin
    Posts
    584
    $975
    -transmission w/48,xxx miles
    -transmission mount
    -5 speed shifter base
    -slave cylinder
    -brake pedal
    -clutch pedal
    -master cylinder
    -clutch fluid reservoir
    -clutch line
    -clutch fork
    $125
    -starter locator plate
    -passenger side intermediate shaft
    -intermediate shaft bracket
    -flywheel bolts
    $80
    -shifter cable
    $40
    99 V6 ecu
    $183
    -Exedy oem replacement clutch
    $150
    -Oem flywheel

    i still plan on getting a Megan short shifter; UH shifter bushings; Greddy, Ralliart, or Momo shift knob; custom shift boot
    Last edited by bsilver23; 05-02-2010 at 08:34 PM
    Bryan - TGCWI - 6g72 5 speed


    http://www.cardomain.com/ride/3376567

  13. #13
    Senior TGC Member 03-Galant-ES's Avatar
    Join Date
    01-08-2008
    Location
    Levittown NY
    Posts
    2,786
    Ill be adding in this thread hopefully. I got about 1700 to put in my car right now. If I can get the manual swap and my evo 8 ecu wired in for that much I will be happy. Then I just need to finish accumulating turbo parts and I am ready for tune.

  14. #14
    TGC Regular bsilver23's Avatar
    Join Date
    04-06-2009
    Location
    Mequon, Wisconsin
    Posts
    584
    ^Yes! that sounds like fun
    Bryan - TGCWI - 6g72 5 speed


    http://www.cardomain.com/ride/3376567

  15. #15
    Senior TGC Member 03-Galant-ES's Avatar
    Join Date
    01-08-2008
    Location
    Levittown NY
    Posts
    2,786
    Quote Originally Posted by bsilver23 View Post
    ^Yes! that sounds like fun
    my turbo and exhaust parts are sitting in my room screaming use us! Its so hard having a 3'' magnaflow sitting in your room and not buying the rest of the parts to install it >.<

  16. #16
    TGC Regular bsilver23's Avatar
    Join Date
    04-06-2009
    Location
    Mequon, Wisconsin
    Posts
    584
    haha yeah ik exactly how you feel
    Bryan - TGCWI - 6g72 5 speed


    http://www.cardomain.com/ride/3376567

Posting Rules

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •