Log in
Register
Reply With QuoteI think the 3rd syle is probably the best of the ones you posted. The lens is really small on the 1st and 2nd style the halos are too big for the small projectors.
Ok so... I've narrowed down my choices of projector fog lights to 3, in order of which ones I like best. I'm thinking that since they will be projectors and have a cut off, and I'd need a relay harness anyway, it'd be ok to get a 55W kit. Where as my non projector headlights will have the 35W so I don't blind people.
Style 1 - 4 inch w/ Halo using H7 bulbs
I'm leaning towards this one... not only will it be large and take up all of the hole on the bumper at 4 inches, the projectors are larger which means a better beam patter I would assume. Plus it will come with 2 switches so I don't have to buy them seperate (which will save me $10 or so), and the other junk.
Style 2 - 3.15 inch w/ Halo using H3 bulbs
Style 3 - No Halo using 880/9005/9006 bulbs
Of course I'd be going with a DDM HID kit, and I'd probably just get the relay harness they have when I get the HID kit, rather than buying it from somebody else and pay another shipping fee.
What do you guys think? Thoughts? Opinions? Experiences between bulb differences?
I think the 3rd syle is probably the best of the ones you posted. The lens is really small on the 1st and 2nd style the halos are too big for the small projectors.
3rd style.... halo in fogs looks gay...
Actually the lense on the first one is the largest. The lense is 3 inches, add the halo and its 4 inches diameter. Where as the 2nd n 3rd are smaller. I'm leaning away from the 2nd because they don't look as nicely crafted. But the 3rd which are P1's are a smaller lense.Originally Posted by 03-Galant-ES
Look here http://cgi.ebay.com/ebaymotors/UNIVE...Q5fAccessories
Those are the same fog lights except the rear end of the housing isn't set up for 880/9005/9006. The lense is much smaller.
So... do you guys still share the same opinion now knowing that the first one has a larger lense?
Posting Rules
Bookmarks