The Galant Center - Powered by vBulletin

Thread: HID's just installed... and they don't work.

Page 1 of 2 12 LastLast
Showing results 1 to 20 of 24
  1. #1

    HID's just installed... and they don't work.

    Yep... that's right... just installed them. Double checked wiring, and everything. Even went and plugged the old bulbs back in just to check... the HID doesn't work.

    Don't know why... but I'm pissed... trying to talk to somebody at DDM now.

  2. #2
    did you disable daytime running lights? if so, try reversing polarity. also if they are single beam non-projector (replacing hi/lo bulbs), try turning off your hi beams as the wiring for 9007 bulbs turns off low beam when high beam is activated.

  3. #3
    Quote Originally Posted by Reelax View Post
    did you disable daytime running lights? if so, try reversing polarity. also if they are single beam non-projector (replacing hi/lo bulbs), try turning off your hi beams as the wiring for 9007 bulbs turns off low beam when high beam is activated.
    DRL's were already disabled... and yeah it was reverse polarity.

    I got so pissed I quadruple checked all connections and then out of curiousity i flipped the connector to the ballast... worked like a charm. Didn't think about reverse polarity... but then again, it IS a jap car... so...

    But thanks for the help anyways reelax... you da man. WHOOO... good thing I got it fixed before the rep got on the phone with DDM... I was about to chew 'em out.

    They're working now. You can delete this post if you want.

  4. #4
    glad it worked out!

  5. #5
    Experienced TGC Member OMEGA PHX's Avatar
    Join Date
    05-03-2009
    Location
    Aguadilla, Puerto Rico
    Posts
    1,465

    I couldn't believe they didn't work but glad you fix it now let see some night pics lol.

    4g64T 5spd

  6. #6
    Im glad it all worked out. I had the exact same problem when i installed my first HID kit on my 8g. Just flipped the polarity on one side of the ballast and voila, they worked.

  7. #7
    Quote Originally Posted by OMEGA PHX View Post
    I couldn't believe they didn't work but glad you fix it now let see some night pics lol.
    You'll get some pictures tomorrow for sure. I'm beat and I let my girlfriend loan my camera to her parents tonight for some church thing-a-magig. I'll get some pics tomorrow and especially when I get the fog lights on there.

    I will tell you this. 6000k 35W... AWESOME. Glad I didn't get 55W. I only got flashed by one person earlier tonight and thats cuz I was on a hill and they were lower than me. The cut off isn't as fancy as projectors, but you can see a nice cut off and the 6000k is fantastic white with just a slight shade of purplish blue. Looks very classy and there is nothing you can't see on the road.

    I'm VERY impressed. VERY satisfied. Although UPS's shipping out of Cali sucks.

    Pic's coming tomorow evening folks.

  8. #8
    how long did u wait for the shipping? i just ordered mine on monday and i got an email saying they were out of stock and would be getting some yesterday... still waiting for shipping confirmation tho..

  9. #9
    Quote Originally Posted by tr1kst4nce View Post
    You'll get some pictures tomorrow for sure. I'm beat and I let my girlfriend loan my camera to her parents tonight for some church thing-a-magig. I'll get some pics tomorrow and especially when I get the fog lights on there.

    I will tell you this. 6000k 35W... AWESOME. Glad I didn't get 55W. I only got flashed by one person earlier tonight and thats cuz I was on a hill and they were lower than me. The cut off isn't as fancy as projectors, but you can see a nice cut off and the 6000k is fantastic white with just a slight shade of purplish blue. Looks very classy and there is nothing you can't see on the road.

    I'm VERY impressed. VERY satisfied. Although UPS's shipping out of Cali sucks.

    Pic's coming tomorow evening folks.
    now that u have HID headlights go verify/readjust the aim... the aim becomes very important since you are now putting out MUCH more light. here is the procedure:

    http://www.ehow.com/how_4962528_aim-headlights.html

  10. #10
    Quote Originally Posted by LatinoX20 View Post
    how long did u wait for the shipping? i just ordered mine on monday and i got an email saying they were out of stock and would be getting some yesterday... still waiting for shipping confirmation tho..
    Well I ordered on a Thursday and hoped they'd get out Friday, cuz their website says most orders ship within 24-48 hours. But they are closed on the weekend so my order didn't get shipped til Monday. I received them Friday. You'll need to take into consideration that they are coming from California. California's UPS and USPS is VERY slow. I can get stuff from almost any other state in 3 days with UPS ground, sometimes depending on how early in the day it ships and what state. But Cali is VERY slow, with everything.

    I heard that they are short staffed, and have a lot of orders to fill due to their sales. So... Even when I call it takes them awhile to answer. I got an email from UPS with a tracking number saying they expect the package for shipping. Then when I got the email the next day from DDM saying it had shipped, they pasted the wrong tracking number on the email. So I called them, and they said yeah the person doing the computer just pasted the wrong tracking number. So....

    They are slow to ship, but pretty good about their customer service and support. Very pleasant and helpful on the phone.

    I think they are just swamped and understaffed. Product came shipped very nicely, they even go in and put a foam piece around the bulb and then tape around the plastic tube that holds the bulbs for shipping so they dont come loose. Each ballast and bulb is in its own individual box and then they put all 4 into a larger box.

    So yeah... like I said. Slow to ship and get the order processed, and then UPS and USPS is slow out of Cali. But well worth the wait. At least their customer service is top notch. And the chick I spoke with let me flirt too ;-)

  11. #11
    Quote Originally Posted by Reelax View Post
    now that u have HID headlights go verify/readjust the aim... the aim becomes very important since you are now putting out MUCH more light. here is the procedure:

    http://www.ehow.com/how_4962528_aim-headlights.html
    I thought about that last night when I took them for a test drive. Went past 3 cops and didn't have trouble. The only person to flash me was at the bottom of a hill as I was going over it. I think they are pretty well straight but I'm going to find a nice level parking lot and a wall and just make sure.

    ALSO... question for you guys. My right headlight, the one I spent the most time with trying to get the darn bulb in the socket (since there is no way of knowing which end is spose to be up). I spent about 15-20 minutes trying to line up the little notches and stuff, and I know I got down real low behind the housing and was breathing into it (still a little chilly outside here). Last night I noticed there was a little condensation on the upper portion inside the headlight. Now today its moved to the bottom.

    You guys think once it warms up a bit outside eventually it will go away? Or.... ?

  12. #12
    Experienced TGC Member johnygezony's Avatar
    Join Date
    10-05-2008
    Location
    Grand Rapids Michigan
    Posts
    1,141
    Quote Originally Posted by tr1kst4nce View Post
    it IS a jap car... so...
    Your car is made in Normal, Illinois

  13. #13
    cant wait till mine get here... post pics of ur lights

  14. #14
    Had the same problem lol..

  15. #15
    Quote Originally Posted by johnygezony View Post
    Your car is made in Normal, Illinois
    Don't be stupid.

    Still a Japanese company and design. Just like BMW is German, they have a plant here in SC and several other countries. Doesn't change the fact that it's a German car.

  16. #16
    Experienced TGC Member johnygezony's Avatar
    Join Date
    10-05-2008
    Location
    Grand Rapids Michigan
    Posts
    1,141
    Quote Originally Posted by tr1kst4nce View Post
    Don't be stupid.

    .
    Whoa there chief

  17. #17
    rocgalant
    Guest
    Good for you. I bet your happy they just goofed on the tracking number and didn't actually send your bulbs somewhere else. I'm still waiting for my correct bulbs to arrive. Then again, according to UPS, they only received my returned bulbs on Friday.

  18. #18
    Quote Originally Posted by rocgalant View Post
    Good for you. I bet your happy they just goofed on the tracking number and didn't actually send your bulbs somewhere else. I'm still waiting for my correct bulbs to arrive. Then again, according to UPS, they only received my returned bulbs on Friday.
    For the past several years, anytime I've sent anything or had something coming from Cali, whether it's UPS, FedEx, USPS, it's ALWAYS slow. But at least they paid for the shipping for you to send them back. It's a hassle, but at least you know you're dealing with a reputable company when they do that.

  19. #19
    As promised I got some pics taken of the HID. Clearly I'm no professional photographer, but you guys get the idea.

    I also took a pic of the parking lights after I did an LED modification in them. The parking lights are putting out 60 lumens. And the turn signals are just swapped out 1157 bulbs by APC, hyper white.

    I didn't get to adjust the aiming just yet, because it started to rain last night, but they are pretty straight for now.





  20. #20
    good job man looks good did you have to take apart the light to do those LED & turning signals or did you just swap the bulb?

Page 1 of 2 12 LastLast

Posting Rules

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •