The Galant Center - Powered by vBulletin

Thread: performance mod central

Showing results 1 to 11 of 11
  1. #1
    TGC Regular bgood12's Avatar
    Join Date
    07-17-2009
    Location
    From Dallas, Texas in Topeka KS
    Posts
    554

    performance mod central

    go to www.autospeed.com click on their DIY section and search through the articles. This site is like the online version of project car magazine. Basically, its an engineer giving you information about how to mod your car. my favorite articles are. about how to make your own L.E.D brake lights, installing your own 15 dollar a/f ratio gauge, doing a rear disk conversion on any car, and mostly tuning your car without needed extra expensive tuning gear. you basically just use pots and resistors to change the load from sensors that the ecu uses. anyway, before you comment give it a look and post anything you think was useful to know.

  2. #2

  3. #3
    I4betterthanUR4
    Guest
    Awesome! I've been searching and I cant find the cheap DIY a/f guage?

  4. #4
    the cheap a/f guage is in the kits section of their autospeed shop
    Light em up.

  5. #5
    TGC Regular bgood12's Avatar
    Join Date
    07-17-2009
    Location
    From Dallas, Texas in Topeka KS
    Posts
    554
    I think I will post a weekly article from their DIY section. I'm sure its easy to look at the first page of DIY articles and say that nothing is there, but there are 55 pages of at last 10 articles. SO, to help I will post a new article here every week.

    The section below is one of a series so I will not show all the parts. This is probably the most helpful article of the site, if you read through ti you will see why:

    Ultimate DIY Automotive Modification Tool-Kit, Part 1

  6. #6
    TGC Regular bgood12's Avatar
    Join Date
    07-17-2009
    Location
    From Dallas, Texas in Topeka KS
    Posts
    554
    this article explains how you can have your stock coil springs reset to adjust your ride height.
    also the car they are doing it on is a Mitsu Verada or USDM the Mitsu Diamante
    Resetting a coil Springs

    This tells you how to do a spring swap

    http://www.autospeed.com/cms/A_107831/article.html
    Last edited by bgood12; 05-01-2010 at 09:17 PM

  7. #7
    TGC Regular bgood12's Avatar
    Join Date
    07-17-2009
    Location
    From Dallas, Texas in Topeka KS
    Posts
    554
    If anyone has any specific articles they liked and want to share post them here and subscribe

  8. #8

  9. #9
    TGC Regular bgood12's Avatar
    Join Date
    07-17-2009
    Location
    From Dallas, Texas in Topeka KS
    Posts
    554
    Admin edit.

    If you want to post a For Sale thread, please follow the rules and do it the right way. Thanks.
    Last edited by polishmafia; 05-09-2010 at 09:17 PM

  10. #10
    TGC Regular bgood12's Avatar
    Join Date
    07-17-2009
    Location
    From Dallas, Texas in Topeka KS
    Posts
    554
    Note: A lot of the time you cant find the items in articles, but if you use the links in the article then it shows right up, just a heads up. they also have a cheap interceptor that can be used for fuel, air, or stability systems. try searching interceptor and looking through articles for it.

  11. #11
    TGC Regular bgood12's Avatar
    Join Date
    07-17-2009
    Location
    From Dallas, Texas in Topeka KS
    Posts
    554
    also go to jaycar.com and look in the kits and modules section and a lot of the things are there including the fuel adjuster kit, mixture displays one bar and the other real numbers and other things

Posting Rules

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •