Yes, that is the correct part.
Does anyone know what the part number is for the v6 E-brake cable? I want to do the swap and think that instead of modifying the backing it would be easier to but the cables.
Also do yall know if this is the right parts to buy http://www.rockauto.com/catalog/rafr...1356689k925312
Lamar Gilmore
You just need to make sure you have rear's from a GTZ or Eclipse GT. If you have the older setup like me from a 2g, the V6 e-brake cable is still different.
99' Galant ESOriginally Posted by qnz
4G64/63T
AEM EMS
cool thanks for the help
Lamar Gilmore
The part numbers that I bought are as follows -
Backing plates - MB950207 and MB950208
Shoe Set - MB950211
E Brake Cables - MR334357 and MR334358
E Brake Cable nut (needed to attach the eBrake cable to the backing plate) MB288653 (Qty. 2)
I also changed the proportioning valve. I'm not sure if you plan on doing that. Let me know if you need the part number.
Bookmarks