get it from the dealer that is your best choice
well I'm halfway done with my swap but yea umm, i forgot clutch bolts "the bolts that connect the clutch cover/plate to the flywheel" and connector's for the reverse light and spedo sensor , i bought my tranny from a JY that practically cut it out of the car i just have bare sensor's and no connector's
any help with these parts would be super, or if you know the dimension's of the bolts i could get them from lows or home depot would be great,
Thanks
get it from the dealer that is your best choice
http://www.gasketer.ecrater.com/
get you OEM parts with low price
go to the dealer for the bolts. Dont use any Home/Depot Lowes bolts.
/thread
Pressure plate bolts #MF241251 $1.06 on OEMMitsubishiparts.com
You should be able to use the vehicle speed sensor from the stock Galant harness and connect to the 5spd speed sensor (at least I was able to on my 99 model).
The reverse pigtail/connector might be something to contact the junkyard you got the trans from about though.
Bookmarks