The Galant Center - Powered by vBulletin

Thread: Exhaust for S/C

Showing results 1 to 5 of 5
  1. #1
    Alister_McRae
    Guest

    Exhaust for S/C

    Hey i gotta question i was curious about. When you guys that have the supercharger, did you upgrade the exhaust size to 3 inch, or do you guys have it at 2.5 all around?....mike

  2. #2
    Senior TGC Member
    Join Date
    07-31-2002
    Location
    Sugar Land, Texas, United States
    Posts
    2,175
    If it were me I'd upgrade to 3 inches. 2.5 seems a little small for boosted applications, especially since many of us V6 naturally aspirated guys upgrade to 2.5. Just for your info, the Magna (Diamante) and Galant sold in the Pacific rim use 2.5 from the factory. The U.S. seems to be the only 2.25 inch non-mandrel bent from the factory.
    "Daisy tumbled short of his dreams, not through her own fault, but because of the colossal vitality of his illusion... No amount of fire or freshness can challenge what a man will store up in his ghostly heart. " - F. Scott Fitzgerald, The Great Gatsby

    "I have not failed 700 times. I have not failed once. I have succeeded in proving that those 700 ways will not work. When I have eliminated the ways that will not work, I will find the way that will work." - Thomas Edison

  3. #3
    TWISTED II
    Guest
    i'm in the process of building my motor, and once its done, i'm puting on a supercharger. i already have my HKS titanium muffler. so yeah, 3 inch is what ya need.

  4. #4
    SuperchargedGTZ
    Guest
    well right now the only exhaust modification i have is the RIPP/AMSS headers with a hks muffler. i am pretty sure that RIPP is coming out with a full true-header system for the eclipse. now i know it wont fit our cars exactly, but depending on how demanding WE ALL ARE for this product maybe he will make it for the galants as well. but as far as the 2.5 or 3, i am still completely stock. but i am sure that a 3" exhaust would help, but the headers are only 2.5", so what is the point of 3"

  5. #5
    Senior TGC Member
    Join Date
    07-31-2002
    Location
    Sugar Land, Texas, United States
    Posts
    2,175
    <div class='quotetop'>QUOTE(GTZ27)</div><div class='quotemain'>but the headers are only 2.5", so what is the point of 3"</div>

    The same reason why the AMSS downpipe is only 2.25 but yet my custom cat-back is 2.5 inch. You need the slightly smaller diameter up near the hot gases. I forget the technical stuff behind all of this but think about it this way as well. The factory is say, 2.25 inches. The GReddy cat-back for the Eclipse is 2.5 inch. You still see a gain of about 4 hp due to opening up the exhaust. Otherwise what'd be the point of upgrading cat-backs right?
    "Daisy tumbled short of his dreams, not through her own fault, but because of the colossal vitality of his illusion... No amount of fire or freshness can challenge what a man will store up in his ghostly heart. " - F. Scott Fitzgerald, The Great Gatsby

    "I have not failed 700 times. I have not failed once. I have succeeded in proving that those 700 ways will not work. When I have eliminated the ways that will not work, I will find the way that will work." - Thomas Edison

Posting Rules

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •