Catch Can Homemade from Argentina

[muchoanime]

There are commercial quantities of oil vapor filters (catch can, pcb mod, catch tank?) Going around in internet
even it can buy but they have inside?! and compressor water trap seems very light.
for that reason I decided to do so.
From what I saw take what seemed to me more functional.
Discard the first proposal with the aluminum bottle because at some point I want to see what happens within
and it is impossible to open. But with the thin walls of this they may have missed and to introduce a material
to condense the oil in a gaseous state?! depending on whether it is possible that this will be the admission by accident.

proposal:
final sketch




as shown in cropuis fumes go straight to the bottom of the bowl hitting the lower wall
must pass through the first trap consists of material and the second trap capacitor consisting of two
grids. The conical filter on top, according to my understanding is if the pressure of the steam is too much, as
an alternative exit in case there is an obstruction within the vessel.
obviously you have to add a key at the bottom despurgue and a viewer of the amount of oil.


A brief review:

Thus began




Grids



going from left to right ...




turned out that there was no available space was to change the way










Lower and upper










And now as I hold it?





To eventually be opened



Final disposition of rust-free condenser elements ...




Preparing for the background creating printing (given the short time with which to do conte di overlooked
fine details)




Vehicle Color matching




and since this lacquer




Finished piece





Installation complete









Is currently being tested as it was then I will comment and I will give a conclusion in this regard.

[mrg7243]

hmm looks interesting, can you try to post some bigger pics would be nice to really see the full effect

[G-spot]

hmm looks interesting, can you try to post some bigger pics would be nice to really see the full effect

You're kidding, right? click on pics and you get 2592 x 1944 resolution that's well enough to get any full effect.

[mrg7243]

You're kidding, right? click on pics and you get 2592 x 1944 resolution that's well enough to get any full effect.

my computer isnt liking it too well, but it takes fine to the ones embeded in the forums with higher resolution. I think it might be imageshack it doenst like

[peanotation]

wow, nice write-up. i'm really anxious to hear how it works out.....i bet it will catch some gunk