New Style fogs Condensation

[02redgalant]

For guys with NEW STYLE fronts

What did you guys do to stop this ...I remember raz76 told me to drill a hole...for those that did were did you drill a hole?....any other methods?

[fatal1]

use a small drill bit and drill like 2-4 holes, there are a few spots in the fogs where you can see where the inner and outer lenses are a little more spread apart. thats where you want to drill

[Reelax]

are there weep holes on the back of the fogs allready?

[Galantman03]

can't you put moisture absorbing desiccant packets in the fogs behind the shrouds? you know the packets that come with new shoes lol

[02redgalant]

are there weep holes on the back of the fogs allready?

yea one but it isnt sufficient... fogs up the front lense



galantman...i was thinking that i did that with my retro fit ...but these fog up pretty bad like after a couple of weeks i can dump out a cup a water lol

[BronxBlur23]

can't you put moisture absorbing desiccant packets in the fogs behind the shrouds? you know the packets that come with new shoes lol

that's what i did, It's called Bulb Grease, its sold at your local autozone. Your suppose to put the grease at the base of the bulb(893) and i even put some on the outside the bulb where it sticks out (if you already changed the bulb you'll know what i'm talking about). I haven't had the "Condensation" (lol @ family guy) problem at all.

[02redgalant]

that's what i did, It's called Bulb Grease, its sold at your local autozone. Your suppose to put the grease at the base of the bulb(893) and i even put some on the outside the bulb where it sticks out (if you already changed the bulb you'll know what i'm talking about). I haven't had the "Condensation" (lol @ family guy) problem at all.

lol hes talking about




bulb grease prevents corrosion on the spades and terminal not condensation

[fatal1]

the problem is the condensation forms between the 2 leses there is a front plastic cover as well as individual ones for each light once you drill the couple holes it lets the mousture release

[Galantman03]

hmmm bummer lol..... so just drill a hole to make air movement go through..... although i personally don't want to drill through my new style fogs...... there got to be another way...

[SkylineG1]

CONDENSATION

[Da_Prodigy]

Lol!!