Post What You Did To Your Car or Bought Today!

[JDyal]

Can't wait for your retrofit, I love my 8gbs and used them for my retrofit and it came out amazing, and you did help me with that so thanks.

[8thLS6]

Installe hic rear visor..did anyone have a slight issue with the top of theirs not being cut a 100% perfect with the curve of the roof/ weather stripping? I know I have it level because of how straight the bottom runs across the window and everything is sitting against the glass tight tape wise. Its just small length of gaps near the outter ends..the center is pretty much dead on. Looks like somethjng might have been off with the cut, I can see it. Its like 97% perfect in all imo

[mrg7243]

I was looking at doing something for my wife's new crossover, but those headlights look like a pain to change out bulbs. I know those Ody lights must've been horrible.

Yeah they are terrible you are supposed to remove the battery on one side and the coolant res, abs res and 3 cooling hoses. Or you can remove the grill and pull the lights. I decided to snake my fat arm through that bitch and pull nothing. I now look like some emo kid

[gallant]

Yeah they are terrible you are supposed to remove the battery on one side and the coolant res, abs res and 3 cooling hoses. Or you can remove the grill and pull the lights. I decided to snake my fat arm through that bitch and pull nothing. I now look like some emo kid

LMAO hahaha

[Bloody Arro]

Thought about quoting that last bit for a sig lol.

[gallant]

for it to make any sense it would have to be the whole thing if not it sounds perverted LOL

[deeznutz]

Thank you Sir Dion! (From sale thread)

BEFORE


AFTER




Sent From My Rooted Galaxy Note 2 using Tapatalk

No problem bro they look sweet ;)

[cleazy123]

That Is one very nice USDm G...same thing happened to me oak....projectors were fine on mine too, put em in my JDM heads..there goes another $200 lol

[mrg7243]

Thought about quoting that last bit for a sig lol.

Go for it

[JDyal]

Installe hic rear visor..did anyone have a slight issue with the top of theirs not being cut a 100% perfect with the curve of the roof/ weather stripping? I know I have it level because of how straight the bottom runs across the window and everything is sitting against the glass tight tape wise. Its just small length of gaps near the outter ends..the center is pretty much dead on. Looks like somethjng might have been off with the cut, I can see it. Its like 97% perfect in all imo

Yeah I did but I'd take it off and use a stronger tape. After a couple of months mine started flapping so I took it off and it gets so dirty under there so I may keep it off

[oakrdrs187]

That Is one very nice USDm G...same thing happened to me oak....projectors were fine on mine too, put em in my JDM heads..there goes another $200 lol

[IG]http://i1188.photobucket.com/albums/z407/cleazy123/93a93b2b.jpg[/IMG]
[IM]http://i1188.photobucket.com/albums/z407/cleazy123/5ece397f.jpg[/IMG]
[IG]http://i1188.photobucket.com/albums/z407/cleazy123/a48d7305.jpg[/IMG]

Oh lord dont post that aftermath picture again. I loved the black one. Good thing you came back stronger on the silver one or I never would have healed.

Sent From My Rooted Galaxy Note 2 using Tapatalk

[JDyal]

That Is one very nice USDm G...same thing happened to me oak....projectors were fine on mine too, put em in my JDM heads..there goes another $200 lol

[IG]http://i1188.photobucket.com/albums/z407/cleazy123/93a93b2b.jpg[/IMG]
[IG]http://i1188.photobucket.com/albums/z407/cleazy123/5ece397f.jpg[/IMG]
[IG]http://i1188.photobucket.com/albums/z407/cleazy123/a48d7305.jpg[/IMG]

Hey it looked great which gives me hope having a black Galant. Is that a USDM bumper?

[cleazy123]

Good looking out guys... Much appreciated. Been lookin at those VIP modular wheels lately I definately would've threw on a set if those and lost the wing...kept the chrome door trim, never seen a vogue lip on a black 8g..

[8thLS6]

Yeah I did but I'd take it off and use a stronger tape. After a couple of months mine started flapping so I took it off and it gets so dirty under there so I may keep it off

Appreciate the heads up and response..did you use the adhesion promoter with it too?

[JDyal]

Appreciate the heads up and response..did you use the adhesion promoter with it too?

I didn't, I didn't want to screw up the rear windshield and since it was 3m tape which I know isn't really 3m, i thought it'd hold. I washed the shit out of it and used a degreaser for any wax that may have been on it.

[gallant]

I want quarter panel blinkers but dont know what to get. Dont want to cut too much into it.

[cleazy123]

Jdyal yea that was a USDm bumper with a mugen lip molded on it

[cleazy123]

Gallant ...I was always thinking about doing the TL fronts on the front fender and then follow to the back of the car and on the rear qp do the red other TL marker....side profile/style between TL and galants look somewhat similar

[gallant]

I’ve seen the side markers at the jy and fell in love but didn’t know if it would look good. Your picture has opened my eyes. pm me some info on the install thanks

[galant1983]

http://i1323.photobucket.com/albums/...ps71efbdbd.mp4