Ok heres another JDM head thread I got questions n looking for answers.

[oakrdrs187]

Try the way I mentioned, splice those wires to the stock H4 hi and ground, after you get a new harness that is.

[Corey2kG]

N what about a stronger relay that won't burn out?

[mrg7243]

go for a 55w relay, i dont know much about wiring and this is all confusing to me haha

[pinoyesv6]

Thanks but the relay shit the bed. It bubbled up n burnt fyi it was a 35w relay. N I left the highs running. So I was thinking since it was a 55w bulb it destryed the relay. Is there a relay strong enough so it won't burn out? N if there maybe a parts store I can buy one?

30 watt relay? never seen a relay be described in watts.

a 30 AMP relay that you can get at radio shack or the auto parts store should be more than plenty.

[oakrdrs187]

N what about a stronger relay that won't burn out?

No that would only apply to the hid side, get the same harness but splice into the H4 harness rather than the solenoid outputs.

[Corey2kG]

30 watt relay? never seen a relay be described in watts.

a 30 AMP relay that you can get at radio shack or the auto parts store should be more than plenty.

Yeah relay. lol For the wire harness for the hids like in the 1st page of the thread. Ok so I need a new harness its smoked I took a pic but I'm on the Wii so I can't post it. Anyways the harness still works just not for the highs I mean burnt. So I took the wires for my highs n stuck them in the hi positive n negative n BAM highs work again n with the harness they run with the lows :D

[oakrdrs187]

Yeah relay. lol For the wire harness for the hids like in the 1st page of the thread. Ok so I need a new harness its smoked I took a pic but I'm on the Wii so I can't post it. Anyways the harness still works just not for the highs I mean burnt. So I took the wires for my highs n stuck them in the hi positive n negative n BAM highs work again n with the harness they run with the lows :D

Told ya!! LOL!!

Don't even bother replacing, just the high on relay burned. You don't need it. Just clean up your wiring and try putting in some quick disconnects so its easy to replace a burned hi beam bulb.

[Corey2kG]

Told ya!! LOL!!

Don't even bother replacing, just the high on relay burned. You don't need it. Just clean up your wiring and try putting in some quick disconnects so its easy to replace a burned hi beam bulb.

The relay burned through the wire. I'm gonna replace the harness in case I have to go to the h4 bulb. But it dideded work thanks lol.

[Corey2kG]

Heres my smoked relay