Ok Guys Going Big

[DieselxIndustry]

Turbo what you have, you'll easily hit 200 if done right, I believe the stock motor tuned right can handle just under 15 psi before you start running into troubles without the motor being internally built.

[Isaurio]

Yes. Evo 8 head will fit to our 4g64 block u need all the evo head parts and
Intake Mani
Tb
Fuel rail and injectors
Upper and lower radiator hose
Evo 8 ecu
Cosmetic head gasket
Water housing and rear pipe
Evo spark plugs cables and coils
Evo 8 or 94 galant gs timing belt
Plus more and more
Just giving you a taste.
Good luck

[BronxBlur23]

Lmao.

So I am going with the 4g64t 5-speed xD.I am going to make a video of this build.

do so cuz i'm in your area, i would be nice to have someone to chase in terms of engine building... I'm starting to lay dynamat as soon as it warms up, so i'm right behind you...

[ValiantGalant]

Intake Mani
Tb
Fuel rail and injectors
Upper and lower radiator hose
Evo 8 ecu
Cosmetic head gasket
Water housing and rear pipe
Evo spark plugs cables and coils
Evo 8 or 94 galant gs timing belt

Yo thanks as well. I see a lot of Evo parts from the tuners club and some are selling those parts. Will see what I can get for my G. Time for some upgrades from Evolution Auto Parts.

[Stewi]

Yes. Evo 8 head will fit to our 4g64 block u need all the evo head parts and
Intake Mani
Tb
Fuel rail and injectors
Upper and lower radiator hose
Evo 8 ecu
Cosmetic head gasket
Water housing and rear pipe
Evo spark plugs cables and coils
Evo 8 or 94 galant gs timing belt
Plus more and more
Just giving you a taste.
Good luck

You can also use the AMS modified OEM MLS headvgasket or the PowerEnterprise Gasket, both are more expensive than cometic but they are better, PE is the best.

You also dont need the EVO upper and lower radiator hose, you actually can do it two ways, you can re-use the stock 8g lower hose and get a universal flexible hose for the upper from an auto parts store for about $15, or you can purchase another stock 8g lower hose, turn it sideways, install it where the upper hose goes and just trim an inch or two off the ends because its a little too long.

[Isaurio]

Umm that would work

[The Moofia Mob]

FREEZE PUT YOUR NEWB HANDS ON TOP OF YOUR NEWB HEADS!

EVO 4 engine i believe wont fit with out major modification. you want a evo 8 engine.
Im guessing you dont know much on the swap? i dont know much my self but i can tell somethings wrong........

Now that sounds like an idea I can use for my 8G.