Galantman03's 8G Build

**Stewi** · 10-18-2011, 06:33 PM

If u intend on using that auto rear diff i have some parts that you'll need that you likely won't find anywhere other that the dealer for $350/each. I have both rear axle inner cv joints for the LSD rear.

**underated** · 10-18-2011, 06:43 PM

looks awesome man definatly going to keep an eye out for future updates

**Galantman03** · 10-19-2011, 10:08 AM

Originally Posted by Isaurio

Did you start the G with the evo ECU?

Never had it started, it would crank just not run, So I thought it had to do with the immob, nothing... I had some guys on evom send me their maps to see if it would start, still nothing. I honestly think the conversion harness is just junk.

Originally Posted by Stewi

If u intend on using that auto rear diff i have some parts that you'll need that you likely won't find anywhere other that the dealer for $350/each. I have both rear axle inner cv joints for the LSD rear.

I intend to, BUT I pretty sure its toast, it was sitting outside with no fluid in it. I'm keeping an eye out for an evo 9 diff also, jic.

Originally Posted by underated

looks awesome man definatly going to keep an eye out for future updates

I'm just waiting on pictures to post updates lol.

On another note, I've been trying to track down Super Vr-4 side skirts with no luck. Does anybody know where I can get them in the states in fiberglass?

**Galantman03** · 10-25-2011, 02:12 PM

Fed Ex Lady is my friend...
Evo 8 T/Case with 38,000 miles on it

Evo 9 5 Speed with 40,000 miles on it

And a Magnus V-5 Intake manifold.

Is the DSM 4g64 pulleys compatible with our pulleys on our car?
http://www.maperformance.com/ati-sup...ic-damper.html

Head gasket wise, yes or no?
http://www.maperformance.com/cometic...015051kit.html

**ricky_db** · 10-25-2011, 07:47 PM

i like where this is going!

**wetamup2k3g** · 10-25-2011, 09:34 PM

Gosh that IM is HUGE lol this is gonna be another one of those epic builds, the interior and exterior is already tits, but this is gonna send it over the edge!

**oakrdrs187** · 10-26-2011, 04:21 AM

I would bang that intake manifold.

In every runner....

**Galantman03** · 10-26-2011, 06:53 AM

Originally Posted by ricky_db

i like where this is going!

Thank you. its got a long ways to go, and I don't think Ill ever be done lol

Originally Posted by wetamup2k3g

Gosh that IM is HUGE lol this is gonna be another one of those epic builds, the interior and exterior is already tits, but this is gonna send it over the edge!

I know, That picture is my bro holding it up, I was lilke holy crap, thats huge. only thing I didn't like was the grinding for the big injectors, but meh, oh well. Interior is getting redone btw lol

Originally Posted by oakrdrs187

I would bang that intake manifold.

In every runner....

LOL nice.

**Galantfan88** · 10-26-2011, 03:54 PM

Damn bro you are going all the way with this. I deff can not wait to see this baby running and now on AWD system shit bro...do your thing.lol

**xd_01** · 10-26-2011, 04:34 PM

Nice manifold, looks huge LOL!

**Isaurio** · 10-26-2011, 05:24 PM

[QUOTE=Galantman03;711717]Never had it started, it would crank just not run, So I thought it had to do with the immob, nothing... I had some guys on evom send me their maps to see if it would start, still nothing. I honestly think the conversion harness is just junk.

yes is a immob issue. Send me the rom so i could take a look at it. If it crank but dont start is the immb. Fuel is not been deliver.

You need to remove the immb in 3 locations on the rom.

**Galantman03** · 10-27-2011, 06:27 AM

Originally Posted by xd_01

Nice manifold, looks huge LOL!

Alot bigger than what I thought, but hey, you need a 75mm TB with it so yeah...

Originally Posted by Galantfan88

Damn bro you are going all the way with this. I deff can not wait to see this baby running and now on AWD system shit bro...do your thing.lol

I'm trying, its just kinda hit a stopping point right now lol

Originally Posted by Isaurio

yes is a immob issue. Send me the rom so i could take a look at it. If it crank but dont start is the immb. Fuel is not been deliver.

You need to remove the immb in 3 locations on the rom.

I'll try to see if I can find it, my computer crashed, so i didn't back up anything with ecu flash at all, in fact I still need to install it let me try to find the rom id #. Thanks man

**BassinG** · 11-11-2011, 09:37 PM

Effin NICE bro!!!!

**Galantman03** · 11-14-2011, 10:22 AM

Thanks man

**Galantman03** · 01-26-2012, 08:43 PM

And a bump... long time no bump actually. Received a couple things today. heres a few snaps.
New Grill from Cali

Brembos, which need some help lol

And Super Tech Beehive Springs with Titianium Retainers

I gotta dig through the garage tommorrow and find some more stuff that I had shipped home... I know got more lol

**Corey2kG** · 01-26-2012, 08:53 PM

Fap all the way with that grille Jared!! Sick!!

**Skyforger** · 01-26-2012, 08:56 PM

Brembos!

**wetamup2k3g** · 01-26-2012, 08:58 PM

Sickness on deck!! Can't wait to see more!

**Rach3T8G** · 01-26-2012, 11:24 PM

Welcome back man!! i like that grille

**Galantman03** · 01-27-2012, 03:14 PM

^Thanks man, the grill looks good, it just has some overspray on it, so its going to get cleared sometime.
Well today I finally went through everything that I have ordered, and wow some of this stuff is a mess.

2g diff on the left, evo one on the right.

Does anybody know if the 3g energy suspension bushings for the rear work for 2g rear arms?

Looks like I'm going to have to take everything and get it media blasted. Now, for those that have powercoated the brembos, did you take them completely apart?

Log in X

Thread: Galantman03's 8G Build

Thread Tools

Tags for this Thread

Bookmarks

Bookmarks

Posting Rules