yea the squirters can be added to our block big debate on it on the evom forums.
http://www.lancershop.com/customer/p...productid=2279
i was just wondering where these are on the evo 8, and if they can be fitted to the 4g64, or do the squirts on the rods do this job?
<a href="http://s40.photobucket.com/albums/e202/duh2150/?action=view&current=crownvicbannerpart3.jpg" target="_blank"><img src="http://i40.photobucket.com/albums/e202/duh2150/crownvicbannerpart3.jpg" border="0" alt="Photobucket"></a>
2000 Mitsu Galant, 4g64/Kia Head, 5 Speed, Evo 8 turbo
2000 Ford Crown Vic, DailyDriver
yea the squirters can be added to our block big debate on it on the evom forums.
2002
4g64 dohc turbo 5-speed
gt30r @20psi stock block,mbc
2.5" tbe
evo 8 ecu and maf
large fmic w/ cx racing intercooler pipes
wrx injectors @ 100psi fuel pressure
They can be added. They get drilled off the mail oil galley in the block. Just an FYI, alot of the guys doing the 2.4 bottom end on EVOM arent using the squirters and they are perfectly fine. The only people who really swear by them are the guys doing road racing and autocross because they are beating the car for 20-30 minutes at a time hot lapping it. Even then, I dont think they are needed, but they are nice to have.
99' Galant ESOriginally Posted by qnz
4G64/63T
AEM EMS
Bookmarks