The Galant Center - Powered by vBulletin

Thread: 5spd speedo fix

Showing results 1 to 15 of 15
  1. #1

    5spd speedo fix

    i have recently put a 5spd in my 02 gtz and i trying to figure out how to fix the speedo im sure this has been talked about before but ant help would be good
    STAY READY AND YOU WONT HAVE TO GET READY!!

  2. #2
    check out whitegalants build thread, the info is in there

  3. #3
    well here is another question do i need any extra parts to get my speedo to work? my 5spd is from a 2000 eclipse gt there are onle two plugs on the tranny i know one is for the reverse not sure on the other
    STAY READY AND YOU WONT HAVE TO GET READY!!

  4. #4
    the other is for your speedo lol. Put up pics or give us some details on why you can get your stock plug in wont work. I was pretty sure I just removed my wires from the auto and pushed it onto the manual sensor. Works fine for me.


    Lancer/EvolutionX Rotor Glow Paint
    6g74 Forged Engine w/ hx40 turbo
    Eclipse GT 5 spd swapped


    Rotor Glow Galant
    Daily Galant
    OZ Edition Eclipse

  5. #5
    here is the 2 sensors off the a/t

    [IMG][/IMG]

    so one of the above sensors should go where this sensor is

    [IMG][/IMG]
    STAY READY AND YOU WONT HAVE TO GET READY!!

  6. #6
    Maybe you need to turn your connector around? If all else fails. just put your auto sensor in, the sensor in your M/T may be bad.


    Lancer/EvolutionX Rotor Glow Paint
    6g74 Forged Engine w/ hx40 turbo
    Eclipse GT 5 spd swapped


    Rotor Glow Galant
    Daily Galant
    OZ Edition Eclipse

  7. #7
    You are here entirely tooo much!! beam514's Avatar
    Join Date
    05-03-2007
    Location
    Socal/Central Coast
    Posts
    3,803
    I'm unfamiliar with the 02 stuff but mine just plugged right in. I had an extra little pigtail that I removed though (not cut or anything, just disconnected).

  8. #8
    02-03 doesnt have speed sensor wiring on the harness at the transmission, u have to make ur own, there is a thread made by Cali that begins to talk about what is needed, after that, whitegalant's thread has the rest of info

  9. #9
    Search bro this has been figured out,
    this tells you what wire is signal, power and ground on your m/t connector
    https://www.thegalantcenter.org/show...t=41064&page=8

    or you can look in my thread
    https://www.thegalantcenter.org/show...=45072&page=11
    post 210 which tells you to connect to what, and get a fsm, that will help you

    its everywhere... it seems you always have a question thats always been on this thread. sorry

    AWD Converted Forward Facing 6466 E85 EVO 8 ECU Powered 2003 Galant

  10. #10
    it seems everytime i try to read a thread on info i want its usually incomplete but thanks anyways
    STAY READY AND YOU WONT HAVE TO GET READY!!

  11. #11
    did u ever get this sorted out.?

    If not this is the wiring.
    https://www.thegalantcenter.org/show...&postcount=133
    4g64DeT 1st evo ecu powered automatic (5 speed now baby)
    BIG 16G Boosted|custom dp|megan racing catback|Deleted Cat|stock dsm manifold|450cc Blues|190lph walbro|evo fuel rail + fpr|greddy type rs bov|evo uicp|Gen FMIC|Custom LICP|Evo cf hood|cf trunk|cyber body kit|motegi dp6 gunmetal 18"|AGXs|Tein S techs|14 psi |5 yrs boosted

  12. #12
    [QUOTE=Johnathansgalant;702023]did u ever get this sorted out.?

    If not this is the wiring.
    https://www.thegalantcenter.org/show...&postcount=133[/QUOTE

    yea i havent fixed it yet but thanks for the info!!! i will try it later today
    STAY READY AND YOU WONT HAVE TO GET READY!!

  13. #13
    Experienced TGC Member Galantfan88's Avatar
    Join Date
    12-02-2008
    Location
    Carteret & Manalapan, NJ
    Posts
    1,263
    Real quick guys I have white, yellow, and black on my speedo...im guessing yellow is for the 12v power and black is ground right?

    Evo 8 ECU / 5 Speed Swap / Fully Built Forged Motor
    Turbonetics Turbo T31 Stage 3 / RPW Stage 3 Camshaft

  14. #14
    not really. IIRC the middle wire is ground, you know what read this
    https://www.thegalantcenter.org/showthread.php?t=41064
    read post 13. that should help you

    AWD Converted Forward Facing 6466 E85 EVO 8 ECU Powered 2003 Galant

  15. #15
    Experienced TGC Member Galantfan88's Avatar
    Join Date
    12-02-2008
    Location
    Carteret & Manalapan, NJ
    Posts
    1,263
    Quote Originally Posted by Galantman03 View Post
    not really. IIRC the middle wire is ground, you know what read this
    https://www.thegalantcenter.org/showthread.php?t=41064
    read post 13. that should help you
    Thanks alot for the help bro.

    Evo 8 ECU / 5 Speed Swap / Fully Built Forged Motor
    Turbonetics Turbo T31 Stage 3 / RPW Stage 3 Camshaft

Posting Rules

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •