check out whitegalants build thread, the info is in there
i have recently put a 5spd in my 02 gtz and i trying to figure out how to fix the speedo im sure this has been talked about before but ant help would be good
STAY READY AND YOU WONT HAVE TO GET READY!!
check out whitegalants build thread, the info is in there
well here is another question do i need any extra parts to get my speedo to work? my 5spd is from a 2000 eclipse gt there are onle two plugs on the tranny i know one is for the reverse not sure on the other
STAY READY AND YOU WONT HAVE TO GET READY!!
the other is for your speedo lol. Put up pics or give us some details on why you can get your stock plug in wont work. I was pretty sure I just removed my wires from the auto and pushed it onto the manual sensor. Works fine for me.
Lancer/EvolutionX Rotor Glow Paint
6g74 Forged Engine w/ hx40 turbo
Eclipse GT 5 spd swapped
Rotor Glow Galant
Daily Galant
OZ Edition Eclipse
here is the 2 sensors off the a/t
[IMG][/IMG]
so one of the above sensors should go where this sensor is
[IMG][/IMG]
STAY READY AND YOU WONT HAVE TO GET READY!!
Maybe you need to turn your connector around? If all else fails. just put your auto sensor in, the sensor in your M/T may be bad.
Lancer/EvolutionX Rotor Glow Paint
6g74 Forged Engine w/ hx40 turbo
Eclipse GT 5 spd swapped
Rotor Glow Galant
Daily Galant
OZ Edition Eclipse
I'm unfamiliar with the 02 stuff but mine just plugged right in. I had an extra little pigtail that I removed though (not cut or anything, just disconnected).
02-03 doesnt have speed sensor wiring on the harness at the transmission, u have to make ur own, there is a thread made by Cali that begins to talk about what is needed, after that, whitegalant's thread has the rest of info
Search bro this has been figured out,
this tells you what wire is signal, power and ground on your m/t connector
https://www.thegalantcenter.org/show...t=41064&page=8
or you can look in my thread
https://www.thegalantcenter.org/show...=45072&page=11
post 210 which tells you to connect to what, and get a fsm, that will help you
its everywhere... it seems you always have a question thats always been on this thread. sorry
it seems everytime i try to read a thread on info i want its usually incomplete but thanks anyways
STAY READY AND YOU WONT HAVE TO GET READY!!
did u ever get this sorted out.?
If not this is the wiring.
https://www.thegalantcenter.org/show...&postcount=133
4g64DeT 1st evo ecu powered automatic (5 speed now baby)
BIG 16G Boosted|custom dp|megan racing catback|Deleted Cat|stock dsm manifold|450cc Blues|190lph walbro|evo fuel rail + fpr|greddy type rs bov|evo uicp|Gen FMIC|Custom LICP|Evo cf hood|cf trunk|cyber body kit|motegi dp6 gunmetal 18"|AGXs|Tein S techs|14 psi |5 yrs boosted
[QUOTE=Johnathansgalant;702023]did u ever get this sorted out.?
If not this is the wiring.
https://www.thegalantcenter.org/show...&postcount=133[/QUOTE
yea i havent fixed it yet but thanks for the info!!! i will try it later today
STAY READY AND YOU WONT HAVE TO GET READY!!
Real quick guys I have white, yellow, and black on my speedo...im guessing yellow is for the 12v power and black is ground right?
Evo 8 ECU / 5 Speed Swap / Fully Built Forged Motor
Turbonetics Turbo T31 Stage 3 / RPW Stage 3 Camshaft
not really. IIRC the middle wire is ground, you know what read this
https://www.thegalantcenter.org/showthread.php?t=41064
read post 13. that should help you
Bookmarks