The Galant Center - Powered by vBulletin

Thread: 01 manual help with speedo

Showing results 1 to 6 of 6
  1. #1

    01 manual help with speedo

    How do i get the speedo to work after 5 speed?
    i tried searching but couldnt find anything...

    the plug that i think should go there doesnt fit...
    the speed sensor is by where the shifter cables are at right?

  2. #2
    no thats the reverse sensor, where the harness for the reverse lamps are

    the speed sensor is located top back of transmission above where the passenger axle connects

  3. #3
    okay ill take a look at it tomorrow. does it just plug in to the stock harness?

    thanks for the help

  4. #4
    It directly plugs in. the connector will be similar to those of the map and tps.
    '99 5-Speed GTZ: Forged 3.6L 6G74T 6764 E85
    2017: 552whp/562wtq SBE on 19psi
    '02 Eclipse GT: 6G72 M/T-swapped Daily Driver
    '10 Endeavor: 6G75 AWD Family-mobile

  5. #5
    alright i think i got it. there was an extra harness on it for some reason that brought it up by the shifter cables.

  6. #6
    might have been the original harness, when i got mine it had the speed sensor harness and the reverse lamp harness and they met by the shifter cable bracket...

Posting Rules

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •