I dont see why not. Just make sure your wires match from engine to sensor. The connectors will be at Autoparts store and the wire stripper/crimper. If you never done this before, it is real easy! Just get you some spare connector and wire and have at. It is pretty much straight forward. And Only thing I can think of, is the gauge of wire to use which I dont know. But I do know that some O2 sensor have to be spliced if I recall correctly. Bosch sensors or something.
If i remember that wire harness would be coming from the area of the T-stat. Probably ties into the wire loom/harness right below the cam sensor around the ECT sensor.
You may want to check your harness first, to get an idea of what you would have to do to fix it and disconnect the battery while working on the wiring then after you fix the wiring, fix the manifold. Thats what I would do if it were me.
Bookmarks