The Galant Center - Powered by vBulletin

Thread: Stock air intake mod

Showing results 1 to 3 of 3
  1. #1
    99Ga1ant
    Guest

    Stock air intake mod

    Ok so today I went ahead and cut the bottom off of my air intake box. It's very easy to do, you save money vs buying an aftermarket intake and sounds good. After driving my car before and after doing this I would def recommend this to others. All you do is take out the three 10mm bolts holding the intake box in. There are also three more bolts holding the snorkle resonator on which you have to get under the driver side to reach with an extension, undo those and it will all pull out. I used a rotozip to cut it and only took about ten mins total.

  2. #2
    huh i never thought of that lol. i did this to my lexus when i had it and it felt and sounded just like a short ram intake. i might have to do this, good job dude.
    The "Tumbler" Is Here
    Stock Longblock/Stock PCM | Custom Garrett 50-1 | 17 Psi | Weighing 2xxxLbs
    3xxWHP/3xxWTQ [Current]

  3. #3
    99Ga1ant
    Guest
    Thanks man. It sounds 10x better for real, I can hear it sucking at idle and when I get down on it it's pretty deep. I have a short ram on my vtec eg civic which I spent a couple hundred on and my G sounds way better.

Posting Rules

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •