Hey TGC, I've done an auto to manual ecu rewire and I do not have spark =/
The 3.5L engine I currently have is from the JY and it may have a bad distributor. I just wanted to confirm all the wires to the distributor had the proper power or grounds.

I currently have power at pin #1 (black w/ white stripe) and pin #6 (Red) when I have the ecu plugged in. Can someone test their distributor wires to see if pin #5 (red wire w/ white stripe) has power or not? Also if any of the other wires have power, that would be good to know.

Thanks, If I had a working v6 in front of me; I wouldn't have to bother anyone lol.
I'll keep checking the service manual, but I find it hard to navigate through.