guys help - turbo list

[Copia]

hey guys, i was wondering what parts will i need to turbo my G
its a 8g, if i will turbo it finaly it will be on closed engine,
what is the part list that i should have in order to do this project?
its a A/T 4g63 2.0L engine.

my only indecision is that my g has 300,000km on it...
so.. i dont know how worthwhile it is actually..

anyway, what's your recommendations about its worthwhile?

thanks guys.

[mko]

- turbo w/internal wastegate or external gate
- oil return line
- oil feed line
- heat shield
- O2 housing
- o2 housing gasket
- Turbo Manifold
- new turbo to manifold bolts
- manifold to turbo gasket
- downpipe
- downpipe gasket
- j-pipe
- j-pipe gasket
- BOV
- bov gasket (depending on BOV you use)
- Evo oil pan(with evo pick-up tube) or stock Galant oil pan with AN fitting welded to it
- boost controller
- 2.5'' ic piping
- 2.5'' couplers
- t bolt clamps
- FMIC
- DSM 450cc injectors or EVO 560cc injectors
- DSM or EVO injector resistor pack
- EVO intake pipe or custom pipe
- fuel rail fittings (optional with AFPR)
- Aeromotive Adjustable fuel pressure regulator - AFPR (optional)
- vacuum manifold
- misc. lines and hoses
- wideband
- boost gauge
- fuel management - piggy back controller, ECU flash or EVO ecu

[Copia]

and do you think that 300K engine will handle the new power good or its a overkill for it?

[mko]

I turboed my engine with 220k miles (about 350k km) and it ran pretty good.