The Galant Center - Powered by vBulletin

Thread: Upgrading to GT throttle body

Showing results 1 to 4 of 4
  1. #1
    NEWBIE mainer's Avatar
    Join Date
    10-22-2012
    Location
    Old Orchard Beach, Maine
    Posts
    23

    Upgrading to GT throttle body

    Just got a GT throttle body for my FE over at club4g shipped for 150. He's gonna paint it for me before sending. I saw the writeup for the swap in another thread, looks easy enough. Have any of you who have done the swap run into any unforeseen issues? Thanks in advance!

  2. #2
    It could not be more plug and play. Literally. Just make sure you use the GT gasket and you'll be set.

  3. #3
    Stock gasket are all the same gasket. You are going to need 5/16 barb fitting for the coolant bypass hose.
    3.8 mivec from gt and galant ralliart are 65mm
    3.8 non mivec from galant and endeavor are 63mm

    Im using the 63mm.

  4. #4
    NEWBIE mainer's Avatar
    Join Date
    10-22-2012
    Location
    Old Orchard Beach, Maine
    Posts
    23
    Sweet that's what I was hoping to hear. Think I'll install an oil catch can while everything's apart. Thanks for the advice guys

Posting Rules

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •