The Galant Center - Powered by vBulletin

Thread: confirm. evo 8/9 oil filter housing and cooler fitment

Showing results 1 to 5 of 5
  1. #1

    confirm. evo 8/9 oil filter housing and cooler fitment

    Evo 8/9 oil filter will bolt onto the 4g69 block. Only require 1 mm washer to space out the serp tension to the oil filter housing.





  2. #2
    Booty Luva wetamup2k3g's Avatar
    Join Date
    12-13-2010
    Location
    Brooklyn, Maryland
    Posts
    4,643
    So this gives you the oil fittings necessary to run a turbo on a 69? That's cool info. Not that it helps me, but 4G/9G guys (and Mondo) have an easy way of running turbo oil lines.

    -Greg

    "I smashed up the grey one, bought me a red;
    Every time we hit the parking lot we turn heads!"
    -Pimp C, "International Players Anthem"

  3. #3
    Yes. Now I can run forced performance turbo oil feed kit that would be perfect lenght to the turbo.
    I was having problem finding lines that were long enough.

  4. #4
    Senior TGC Member Isaurio's Avatar
    Join Date
    06-13-2008
    Location
    Bronx, NY
    Posts
    2,606
    That one you have is from an evo 8.

    The evo 9 have an extra 1/8 port for the oil pressure switch and maybe a different oil pressure spring.

    Triple Diamond Motors East Cost
    02 2.5L Fully Built Galant 5 speed
    SOHC Turbo
    http://www.thegalantcenter.org/showthread.php?52330-Isaurio-s-Turbo-Built-quot-4G64T-quot-Heavy-pics>My 4G64 Turbo Built

  5. #5
    Yeah. Gasket are the same part number so it should bolt up the same way.

Posting Rules

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •