Can you get a video recording? Pics of the installed strut/spring?
as the title says I installed new shocks and struts "kyb- gr2" and kept the original springs. I made sure everything fit perfectly and was torqued per spec. Anything I can check to see what it is? It does it mostly when I hit small dips in the road. Thanks guys
Sent from my iPhone using Tapatalk
Can you get a video recording? Pics of the installed strut/spring?
Lancer/EvolutionX Rotor Glow Paint
6g74 Forged Engine w/ hx40 turbo
Eclipse GT 5 spd swapped
Rotor Glow Galant
Daily Galant
OZ Edition Eclipse
Did you put the rubber bump stops on the new shocks? You could be bottoming out. Other possibility is that you didn't get the nut on the top of the shock tight enough. I'd recheck the nuts.
- Nick, 94 Galant ES - 4G64 DOHC Turbo AWD, E3-16G & Manifold, 780cc inj, fmic, DS-MAP Speed Density
"Ignorance more frequently begets confidence than does knowledge..." - Charles Darwin
Also check your sway bar end links I have a broken one and when the car rooms to that side it hits the underbody.
Don't be afraid of the Google. It won't bite.
http://www.partstrain.com/ShopByDepa...HI/GALANT/1999
It goes on the shock shaft. All four should have one.
- Nick, 94 Galant ES - 4G64 DOHC Turbo AWD, E3-16G & Manifold, 780cc inj, fmic, DS-MAP Speed Density
"Ignorance more frequently begets confidence than does knowledge..." - Charles Darwin
I replaced both front sway bar end links because the ones that were on there were shit. I used prostop ones and greased them for shit afterward. I'm thinking about taking it to a shop.
I reused the old ones that I had on it before and one of them was kind of beat, could it be that?Don't be afraid of the Google. It won't bite.
http://www.partstrain.com/ShopByDepa...HI/GALANT/1999
It goes on the shock shaft. All four should have one.
Get new bump stops it could be that
«Carlos»
Bookmarks