The Galant Center - Powered by vBulletin

Thread: 98 2.4..got hot, replaced melted wire set and plugs, wont start

Showing results 1 to 3 of 3
  1. #1
    98GALANTMOBILE
    Guest

    98 2.4..got hot, replaced melted wire set and plugs, wont start

    coming home one night just did timing belt set, broke a water hose, got a little hot. i replaced wire set, plugs. i spray ether and it tries to start. i have fuel to rail, injectors test good at 15 ohms. no spray. tested crank sensor solid signal of 6 volts. code reader worked before, if i wiggle it tries to work. any idea;s? 230000 miles good compression, no water in oil, the fuel throttle body hose broke. i also replaced mfi/efi dual relay pack, can hear run. i am thnking crank sensor????

  2. #2
    You are here entirely tooo much!! Galanttuner10's Avatar
    Join Date
    08-13-2008
    Location
    Waterbury, CT
    Posts
    3,331
    Check fuses
    2014 Lancer Evo GSR
    1996 Galant S 5 Speed Turbo
    Need a Turbo rebuilt or upgraded--> http://www.thegalantcenter.org/showt...ebuild-Service

  3. #3
    98GALANTMOBILE
    Guest
    fuses good. installed new efi/fuel pump relay. the fuel pump did not come on. ran seperate ground wire at fuel pump under seat, fuel pump came on. injectors not spraying. help.

Posting Rules

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •