-
NEWBIE
how to replace driver side tail light assembly?
Hello,
I have tried to take the old tal light assembly off myself buy cannot seem to get the darn piece off. have looked online to find a step by step process on how to change the driver side tail light assembly on a 2004 Mitsubishi Galant(9th Gen). I've posted a couple pictures of the old one on the car currently and the new one. i had a car crash into my while i was ! PARKED ! at college.
Does anyone know how to replace this part ? also possibly a step by step guide?
Thank you for any help you can provide :)
http://imageshack.com/a/img903/9837/m0W374.jpg
http://imageshack.com/a/img910/2821/ANETBC.jpg
-
New Member
I replaced the passenger one on my 07 and the light assembly looks the same
My steps:
-Open the trunk
-Pull back the carpet that is behind the taillight assembly
-There are 2(if i remember correctly) nuts that you will have to remove (believe they are 10 or 12mm)
-Once the nuts are off the taillight should pull straight out from the outside (it may be kind of stiff at first so wiggle it around while pulling)
-Then pop in the new assembly and bolt it back up
If you have anymore questions feel free to ask. I can take a couple pics if you really need
Good luck
ps. Sorry to hear about the accident. Same thing happened to me while at work one day
-
NEWBIE
Thank you for your response. It helped me out greatly :)
I thought I thank you when I saw the response at the time, but didn't.
Sent from my Nexus 6 using Tapatalk
Posting Rules
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules
Bookmarks