The Galant Center - Powered by vBulletin

Thread: installing universal keyless entry kit.

Showing results 1 to 1 of 1
  1. #1

    installing universal keyless entry kit.

    Hello. I have spent like 10 hours searching online already and nothing. Please help someone.So
    Previous owner of car threw out remote key. I bought simple universal central lock kit ( you can see them on ebay/amazon for 10-20$) Found out almost all wires only thing left is '' opening signal'' and ''closing signal''
    Removed door panels, found actuator but there are 5 wires not 2. Tried some of ways until blew up fuse,replaced it, still havent managed to connect kit. There are blue/black wire, blue/red, brown, green/white and black. Anyone knows which would be right ones? Other question is, do i cut them and connect to new kit or just add wires from new kit to them without cutting.I didnt cut, maybe that was the problem.
    Last question,mitsubishi galant uses negative or positive triggering? i found that it should be negative,so tested only that one.

    Car - Mitsubishi Galant 2000 2.5 v6, 120kw, 163hp. EU version.
    Please someone help in any way, i really dont know what else to try.
    wires
    https://prnt.sc/q8bub7
    diagram
    https://prnt.sc/q8buhl
    kit
    http://prntscr.com/q916kt
    from user manual (not sure if right one)
    http://prntscr.com/q916pg
    Last edited by archii; 12-10-2019 at 03:50 PM Reason: images doesnt work,doohh

Posting Rules

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •