The Galant Center - Powered by vBulletin

Thread: Front tag holder

Showing results 1 to 7 of 7
  1. #1
    Supernova
    Guest

    Front tag holder

    If I were to take off the front tag holder, I know theres gotta be some screws in there thats gonna leave some screw holes in the bumper. How would I go about patching/covering those holes up once the tag holder is off?

  2. #2
    escoson
    Guest
    i would think filling with bondo, sanding, periming then painting the area.

  3. #3
    esco_2003
    Guest

    dont know

    I dont know bondo maybe?

    Anyway were are u going to put the plate them?
    You know u need one in the front right u gonna get pulled over.
    I was going to take the plate off then I decieded not too, because of that.

  4. #4
    esco_2003
    Guest

    yo

    dayum escoson u beat me to the punch line I took to long typing this shit

  5. #5
    Supernova
    Guest

    Re: dont know

    Quote Originally Posted by esco_2003
    I dont know bondo maybe?

    Anyway were are u going to put the plate them?
    You know u need one in the front right u gonna get pulled over.
    I was going to take the plate off then I decieded not too, because of that.
    Alabama doesn't require to have 2 tags. Just the one in the back.

    Hmmm... bondo huh? I'll have to check with my dad. I'm not good at this kinda stuff.

  6. #6
    Experienced TGC Member Lazarus's Avatar
    Join Date
    07-31-2002
    Location
    Jacksonville Florida
    Posts
    1,409
    Best bets are probably gonna be Eurathane. Bondo may not hold as well as Eurathane because it drys hard. Eurathane on teh other hand will flex. Not saying your bumper is gonna do all that much moving but it seems like the better choice.

    That or just get 2 push pins and shove em in there.
    C.J. Cameron
    RETIRED TUNER!!!!

    "Keeping it Simple"

  7. #7
    If you have a front bracket, just screw your license plate/ label holder onto it. If you don't have one, you might consider using an adhesive-mounted bracket or a bracket made specifically for the shape of your model's bumper.

Posting Rules

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •