how do u install them
Pull off the connector
Pull off the rubber boot
Unscrew the little screw (part way)
Then get the wire/spring thing to release by removing it from under the screw (which holds it down)
And the light bulb should come out.
It may take some fiddling...
Reverse the process the reinstall (remember DON'T touch the glass part on the bulbs!!)
you don't ahve to unscrew anything. uncrewing shit just makes it harder and increases the chances of u losing something, ie. the screw. just push down on either left left or the right (forgot which 1, my car hasn't had headlights for over a month) and you should be able to push in and down to swing the clip open...Originally Posted by BlueESV6
Pull off the connector
Pull off the rubber boot
Unscrew the little screw (part way)
Then get the wire/spring thing to release by removing it from under the screw (which holds it down)
And the light bulb should come out.
It may take some fiddling...
Reverse the process the reinstall (remember DON'T touch the glass part on the bulbs!!)
Finally raised my headlights and what a difference it made! Much better now. I wouldn't think changing bulbs would require that but the beam covers road much better now! I still like the bulbs... no melting and very inexpensive...
which ones you get? Got fog bulbs to match?? WHo was the uebay user id?
carparts168@yahoo
The bulbs were listed as mirage H4 5000K's and were $8 plus shipping.
I have not found any fogs to match yet and am looking (found some which may work for $25) for an inexpensive set....
Hope this helps.... Good Luck!
Posting Rules
Log in
Register
Reply With Quote
Bookmarks