I will take pics in the morning and email them to you. I have had 2 CF Hoods and had to do it to both.
I do want to add, once I cut the underside for the strut towers to clear the hood fits perfect.
Ok so my VIS hood fits like crap. I know of people having to cut the underside to clear the strut towers, I would do that and then re-fiberglass the holes and shape them for clearance but I dont feel that its fair to have to do that to a hood I just spent $500 on. I spoke with VIS and they said they have never had any complaints of the hood or trunk not fitting correctly. They said they never heard of ANYONE having to cut the underside of the hoods for clearance. I need everyones help on this one, I need pics of your hoods and trunks that dont fit and if your hood does fit, I need pics of the underside showing you had to cut out it for proper clearance. Please send me a few pics of the whole car too so I can show them this is on more then one car. Please post the link to the pics here or Email me the pics at [email protected]
Maybe if we come together on this and show them the problems they will correct them in the future so nobody else will have to deal with this issue. Thanks.
99' Galant ESOriginally Posted by qnz
4G64/63T
AEM EMS
I will take pics in the morning and email them to you. I have had 2 CF Hoods and had to do it to both.
I do want to add, once I cut the underside for the strut towers to clear the hood fits perfect.
My VIS monster hood has that problem too, it fits now but only after I cut some out, I'll snap some pics tonight and send them to you.
OZ Rally Crew #001, Quaife Club member :D
BS... I told them about the problem when I was an actual vendor of VIS... they where fully aware of the problem but there was nothing they could do because the hood was based off of a JDM hood and the cost of a new mold would be too much... My POC name was Sunny... I doubt he is going to remember me but tell him my name (Jason Nickel) with DNA Racing from like five years ago... see if that jogs his memory...
and tell them the problem started when they switched the clear coat too... these new hoods from VIS are alot more fragile then the first generation hood I have on my car... also I did not have to cut anything on it but it does rub on the struts... not bad but I can take a picture tomorrow showing the black marks it leaves on the car...
99' Galant ESOriginally Posted by qnz
4G64/63T
AEM EMS
For the guys that replied, thanks for your help. Please email me the pics as soon as you can, I would like to send a a group of pictures to VIS on monday and get them to listen. Im just tired of all the false advertising with their 100% bolt on OEM fit BS, because I have never heard of anything they make fitting correctly without modification.
99' Galant ESOriginally Posted by qnz
4G64/63T
AEM EMS
kinda off topic but carbon by design doesnt make anything for our cars and if not maybe we should come together as a group and see if they can make some hoods and trunks for us. i know i had a cf hood from them on my srt4 and it fit perfect with no modifications or anything.
I believe Noel may be making some trunks in cf and can already do hoods in cf for people. Go to him great prices and service and he is a trusted member of TGC. https://www.thegalantcenter.org/forumdisplay.php?f=122. Okay I looked he doesnt have anything of the sort yet, but most of the members interested in CF Hood or Trunk will trust him most of all since a few scams happened lately.
So now this thread can get back on topic. Brian did you talk to Jason about this I believe he has VIS I may be mistaken though.
Last edited by 03-Galant-ES; 03-19-2010 at 10:28 PM
i have a good example for you, ill snap a few pictures right quick....
I can take a pic of mine in a minute and send it as well. Mine is cut to fit, and it's the EVO style cf hood.
})({ Heather })({
![]()
- "If you never take risks, you'll have a wasted soul."
This is both sides cut- u can see the rectangles with orange on them..
Thats where it hits on the strut tower where u see the orange and scrapes
the other scrape on the other side
closeup of the cut
what i had to do to get the vis trunk to latch
trunk fitment is like ass
trunk fitment
more crap fitment
trunk does not fit without a lot of mods..
4g64DeT 1st evo ecu powered automatic (5 speed now baby)
BIG 16G Boosted|custom dp|megan racing catback|Deleted Cat|stock dsm manifold|450cc Blues|190lph walbro|evo fuel rail + fpr|greddy type rs bov|evo uicp|Gen FMIC|Custom LICP|Evo cf hood|cf trunk|cyber body kit|motegi dp6 gunmetal 18"|AGXs|Tein S techs|14 psi |5 yrs boosted
Guys alot of people promised me pics and so far only Krispy has come through and actually sent them. Can you guys please help me out and send me some pics.
99' Galant ESOriginally Posted by qnz
4G64/63T
AEM EMS
^Are those pics of the VIS hood hitting the strut towers? I never had that problem with my Seibon hood. I wonder if the mold is different....
Success is achieved through dedication and personal sacrifice. Eye for an Eye_Tooth for Tooth_Blood for Blood.
Could it be that the VIS is for the JDM 8g which has a different suspension ?
u need them emailed or posted is fine??
4g64DeT 1st evo ecu powered automatic (5 speed now baby)
BIG 16G Boosted|custom dp|megan racing catback|Deleted Cat|stock dsm manifold|450cc Blues|190lph walbro|evo fuel rail + fpr|greddy type rs bov|evo uicp|Gen FMIC|Custom LICP|Evo cf hood|cf trunk|cyber body kit|motegi dp6 gunmetal 18"|AGXs|Tein S techs|14 psi |5 yrs boosted
emailed is better
99' Galant ESOriginally Posted by qnz
4G64/63T
AEM EMS
Bookmarks