The Galant Center - Powered by vBulletin

Thread: removing tail lights, spoiler light

Showing results 1 to 4 of 4
  1. #1

    removing tail lights, spoiler light

    This is probably simple, but I figured I'd post this so when time comes I won't run into problems. I have a 01 GTZ. I'm looking to remove the tail lights and the spoiler light to spray them with VHT NiteShade. How do I go about this process?

    Thanks in advance!

  2. #2
    the tails are bolted onto the body. peel back the carpet and you'll see the mounting studs and the nuts that hold them to the car.

    and for the spoiler, i believe there are screws on the underside

    Webhosting for less than $3 a month? put "pinoyesv6" as a promo code.

  3. #3
    I don't think you can take the spoiler light off. I sprayed mine with Nite Shades, but I did it before I installed the spoiler, and the light was not yet attached. So, I sprayed the light, then stuck it onto the spoiler. What you'll probably have to do is mask off the spoiler and the car, then spray the light.

  4. #4
    Senior TGC Member lonestar22's Avatar
    Join Date
    01-24-2005
    Location
    DFW/Stillwater
    Posts
    2,752
    just make sure when ur putting them back on not to tighten the bolts too much or the metal stud will come out of the plastic housing, making that sport useless.
    RIP GALANT, GOOD MORNING BMW 330i

    330i ZSP (E90) - S4 (B5) / hellaflush

Posting Rules

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •