The Galant Center - Powered by vBulletin

Thread: wires

Showing results 1 to 3 of 3
  1. #1
    I've put my microtech system on my 7g,the engine starts,but the fuel guage and the rpm doesn't work.
    Does someone knows whats the color of the rmp and fuel guage wire?and where does it plug on the stock harness?

  2. #2
    Quote Originally Posted by microgalant
    I've put my microtech system on my 7g,the engine starts,but the fuel guage and the rpm doesn't work.
    Does someone knows whats the color of the rmp and fuel guage wire?and where does it plug on the stock harness?
    NEED HELP ASAP

  3. #3
    You are here entirely tooo much!! seth98esT's Avatar
    Join Date
    08-01-2002
    Location
    Keokuk, IA
    Posts
    8,348
    Heres how the fuel pump works. Pin 8 on the ECU goes to the fuel pump relay in which a black/blue wire runs to the fuel pump for power/signal.

    (Click for bigger picture)

    For the RPM(On a 97/98 Galant ECU) it will be pin 31 on the ECU which is a white wire. I am pretty sure there are two plugs for the distributor, a larger one and a 2-pin one. THe white wire on the 2-pin plug is the tach signal.
    7g for life!

Posting Rules

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •