Interesting, how is it holding together onto the trunk itself? Do the CF trunks have the same holes to bolt in stock parts (Besides the USDM garnish that doesn't fit)?
since when you ask... since i cut 1/4 of each usdm garnish off and molded them together to make 1 custom JDM fit garnish for the CF trunk lid... and colormatched the GALANT letters... also have the usable keyhole and lock...
thought it was going to be a tough math problem? sorry...
Interesting, how is it holding together onto the trunk itself? Do the CF trunks have the same holes to bolt in stock parts (Besides the USDM garnish that doesn't fit)?
3/4+3/4= 1 1/2
Originally Posted by Shadow19
ummm, yeah... but i have one whole custom garnish... just one, not one and a half...
well, on the USDM version there is the spots on the end where the clips go... i molded bolts in there sticking out the opposite way so they go through the trunk lid and then on the inner side of the trunk lid i put lock nuts and washers and tightened it up pretty good, and used the existing screw holes i had left to secure the rest in the middle....Originally Posted by Calipso
thanks Jay... knew you would like that one... i've been working on it since before you managed to get that civic garnish to fit...Originally Posted by mrjaydeeone
good use of your resources...clean work indeed
> TGCPA - SOUTHEAST
> 2010 Evolution X SE #183 of 340 (1 of 54 in Octane Blue)
> 1999 ES V6 (Sold 2/2011)
good job!
Webhosting for less than $3 a month? put "pinoyesv6" as a promo code.
good job!
Accident. Deemed Unfixable. Got a check for it.
Very clean,Matt. Looks stock!
Looks factory. Great!
8G 4 life!
Mods: CAI,Grounding wires, CCorners, Shaved, 3G STB. AGX/Teins, Addco bar, OZ F1 wheels And well maintained : )
aaaaaaaaaaaaaaaaa nice work matt, clean
2009 Mitsubishi Lancer Ralliart
JDM 5 SPEED 4G64
TO GET TO A MAN'S HEART....IS THROUGH 4G64 egh and may be through 4B11T
NICE GOING.
Not how fast your car goes but how good u drive going fast.
Drive It Like You Stole It!
7G Erubini Body Kit for sale
http://thegalantcenter.net/forum/viewtopic.php?t=57678
it looks really good. It's hard to pick out where you connected them. can you post distant shot too. to see how it looks from far. Good work.
-Pedro
actually you can't tell at all where they are molded... that little line on the garnish is pencil... i was marking it so i knew exactly where to put the letters... it's washed off now...
x2 pleaseOriginally Posted by Kalamidad
looks damn good in the one pic
If you post stupid and incorrect information, you will get red nuggets.
Bookmarks