installing side markers?

[GFORCE99]

whats up , have any of you guys installed side markers on your galant?
How do you get in above the wheel well that black plastic after you drill the hole and should I use a good clear sealnt for the hole or it doent matter what kind you use.

Thanks.

[pinoyesv6]

i forgot but the fender line is just clipped or bolted on. really easy. it will be even easier if you have ur car in the air and have the wheel off too. as for the sealant, paint should be good enough. paint the bare metal and install the sidemarkers while the paint is still wet so it kinda seals as it dries.

[Fishboy55]

That inner fender cover is screwed in with a bunch of philips screws. It comes out real easy. Thenyou can tie the sidemarker wires to the bundle that runs up to under the hood. Makes a perfect channel to follow for the sidemarkers. And like Allan said, no need to seal the hole. Just some touch up paint on the edges will be fine. The 3M tape will seal the water out well enough. Also like he said, raise the car and remove the wheel. It'll make it much easier. I did mine in like an hour.

Chip

[GFORCE99]

Thanks

[GFORCE99]

finished it today looks good mitsubishi should of had them on our cars